CPS Oil Water Separator

Separated oil discharge through oil skimmer of inner and store at storage tank. Therefore separated oil can be re-use.

6. RE-USED OF SEPARATED OIL

Cleaning depends on the degree of sludge. In normal, it is the only one maintenance operation with warm water clean is not necessary on occasion.

5. SIMPLE MAINTENANCE AND MANAGEMENT

Limited of capacity depend on a number of pack in oil water separator. Therefore it is possible for large volume and it has efficiency like small volume.

4. TREATMENT CAPACITY IS NEAR UNLIMITED

There is no need of manager because the separator is successive separation make and simple equipment for everyone to handle.

3. NO NEED OF MANAGER

Plate pack is made of polypropylene which is not consumptive but permanent and the inner parts at immovable and the no rolling part. So EPS pack can actually be used semi-pemanently.

2. SEMI-PERMANENTLY

Be separated with 5ppm or less in average.

1. HIGH TREATMENT EFFICIENCY

Merits

-It is appropriate for the waste water containing a little sludge.

-It is appropriate for removing 1000 PPM or lower oil

-When oil is mixed with sludge, its specific gravity become similar to that of water and it passes through the oily water separation tank. In that case, it can be completely removed by the adsorbent of the filtering tank.

-Oil floating on the surface of water is removed using Pipe Oil Skimmer.

-Oil with a temperature of 0 to 100 degrees Celsius and PH 2 to 10 can be processed.

-Oil particles bigger than 30 to 60 micron can be 100 percent removed.

-Oil can be removed to the level of 5PPM or less.

Performance

4. Full automatic operation is possible

3. Oil particles are sequentially separated by natural pressure

2. Once installed, no maintenance fee applies due to its excellent separation capability

1. Oil - water separator (CPS system) specially designed using coalescing plates

Features