removed during the process. Finally oil flows into vacuum pump which use stereo-evaporation removing residual trace of water and steam is condensed in the condenser or expelled out by the vacuum system. the oil was transported out by oil pump. The purification process has finished.
water content. After that, oil passes through the fine filter and fine particles of matters is
When the oil purification starts, firstly contaminated oil enter into heater, secondly flowed into pre-filter under the difference pressure, in which the large impurities are removed. Thirdly oil goes into intermediate filter. Fourthly oil flow into water separator, the water separator adopts a special skill which changes the change the impaction of oil and water to speed up trace water and coagulate big water which is separated from oil and stored in
1, Working principle
Working principe& flow chart:
Two(2) copies of operating & maintenance manuals are supplied with each purifier. This system are designed to operate with the utmost simplicity and is required, please contact TONGRUI for additional charges.
TONGRUI Warrant the plant supplied under this specification against defects in material and workmanship under normal use and service for a period of sixteen (16) months from date of shipment or twelve (12) months after the start up of the system. TONGRUI obligation under this warranty is limited to repairing or furnishing, without charge F.O.B. point of manufacture, a similar part to replace any part, which was proven to be defective within warranty period. TONGRUI shall not in any event be held responsible for any indirect or consequential damages. The performance guarantee will be within limitations as detailed in duty & performance paragraph of this specification.
Guarantees & Documentation:
Utilize Tongruis own invented technology of H, P, M macromolecule material, which can reduce 1 or 2 color code of oil, and especially fit to high viscosity lubricant oil, freezing machine oil, hydraulic oil and gear oil etc.
Adopt high precision and stainless steel FH rectangle filtration system that import from Japan.
Strong demulsifying capability, which could easy to separate the massive moisture contents, also easy to get rid of the little tiny water from oil.
Effectively remove the iron, flake, dust, impurities, water and organic substance from the inferior oil. Moreover, it can eliminate organic and inorganic acid to recover the performance of lubricant oil.
Features:
After the oil treating in the oil purifier, the lubricant oil can be used in high precision and hydraulic device both domestic and foreign due to the lower demulsifying value, less water content and high precision impurities.
This machine adopts the latest technology of demulsifying molecule, dehydration, degasification, and advanced heat dissipation system. It can assure the demulsification of vacuum pump oil by turning vapor about 80 into water in one second. The electric heating function can heat oil into appointed temperature very quickly and take off 50%~80% water from oil within a short time. The special-made filter system can remove the impurity from oil efficiently, so the polluted oil can reach the standard of new oil and be reused.
Edges of ZJD:
It is widely used in hydropower station, metallurgy, spring steel factory, fertilizer factory, power plant, motor factory, petrifaction, railroad and other enterprises. It can purify mechanical oil, refrigerator oil, hydraulic oil, quenching oil, steamer oil, diesel engine oil, wheel oil, insulation oil, and emulsification oil, oil with too much water and waste oil. The polluted lubricating oil is purified and reused by taking off water-solubility, acid, alkali and impurity. It can reach the national stand of keeping working viscidity, flash point, etc.
ZJD series oil machinery are suitable especially for purifying and restoring hydraulic oil, machine oil, gear oil, coolant oil and various other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. ZJD series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.
Application:
oil machinery suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other
Package: | WOODEN CASE |
Type: | Oil Purifier |
Model Number: | ZJD |
Brand Name: | TONGRUI |
Place of Origin: | Chongqing China (Mainland) |
How to scientifically choose the correct cooler?Let us assist you.We pioneered online selection of cooler requirements.Don\'t worry about buying the wrong cooler, just buying the suited one. Delta Oil Cooler adopts the copper tube with more than 99.97% copper content.It is ...
Come From SHANGHAI HUANHUA MACHINERY CO.LTD.
The good performance of prevent from rusting, wearing, corrosion and emulsification. Reducing the wear of hydraulic pump effectively. The product model is divided into 10, 22, 32, 46, 68, 100, 150 and so on. If you demond higher requirments of temperature, oil change period and ...
Come From SKALN LUBRICANT OIL
Product parameter SKALN --Antiwear hydraulic oil L-HM Series ISO Grade 32 46 68 100 Density,Kg/L@15℃ 0.873 0.874 0.875 0.884 Flash point,COC,℃ 208 230 220 230 Pour point,℃ -15 -12 -9 -12 Viscosity, Mm2/s@40℃ 30 5.2 44.3 6.5 Viscosity, Mm2/s@100℃ 65.8 8.4 95.8 10.6 ...
Come From SKALN LUBRICANT OIL