Water purification/desalting equipment

175

Less 0,01

0,1

0,1

Less 0,01

0,5

final solution mg/l

Concentration in the

10300

0,4

1,5

3,7

58

4,2

initial solution mg/l

Concentration in the

mineralization

General

Manganese

Iron III

Iron II

Suspensions

Hardness

Indications

 

THE TABLE OF THE CERTIFIED TEST RESULTS

 

The plant may produce fresh water according to the standards, proved by the results of the certification testing. A Quality Certificate and a Hygienic Certificate 77.01.0.485..05034.03.3 dated 11.03.2003 (Issued by the State Sanitary and Epidemiological Department of the Russian Federation) are available.

1

Guarantee, years

30

Fixed operating resource of the module, years

Constant and automatic

Operating time

Customer requirements

Quality of cleaned water

less than 3

Power consumption, kilowatt-hour per cubic meters

1200

Productivity, cubic meters per hour or in accordance with customer requirement

 

 TECHNICAL-ECONOMIC INDICES OF THE MODULE

* The module can clean and distil water with any level of natural mineralization.

380V, 50Hz

Triple-phase

220V, 50Hz

Single-phase

Energy supply system:

100%

Maximum humidity, %.

30

Maximum temperature of initial water, ?

70

Maximum air temperature, ?

up to 0,5

of initial water, g/l

Total amount of the dissolved substances

65

Mineralization of initial water, g/l*   THE MODULE SPECIFICATION

sediment admixtures (salts, etc.)

?         Mobile container (or conveyer) for

?         Shiber (small hole);

?         Contour pump;

?         Vessel - crystallizer;

?         Heat exchanger;

?         Steam storage device

?         Hydrodynamic steam generator;

?         Pump (contour);

?         Electric motor;

?         Valve or admission valve;

?         Separating vessel;

?         Hydrodynamic pump-heat generator;

?         Air-bend valve;

?         Ejector (stream compressor);

?         Heat exchanger;

?         Seawater supply pump (50 m3/h);

?         T Vessel - seawater storage device; The module consists of:   STRUCTURE OF THE PURIFICATION MODULE The plant model "WATERFALL-1200" represents an all-in-one module 10x3x3 m., operating by power supply 380/220 V. The module is equipped with all required automatic machinery and allows to purify and desalt up to 50 m3/h of salted or/and polluted water in a continuous mode (24/7).   SEA-WATER DASALTING PLANT "WATERFALL-1200" Main Advantages A new water purifying and sea-water desalting technology is based on a hydro-wave method, which has never being used in this area before. Physical processes based on hydrodynamic modes created in an aquatic environment in combination with the exposure of the electromagnetic fields, make favorable conditions in a purifying solution for water evaporation many times faster than in any other known cases. For the first time in the world practice the purification and desalting of the aquatic environments from the suspended particles and soluble substances are being carried out only due to hydrodynamic effects with the influence on the water by sources of the mechanical oscillation. The plant has been developed by our Scientific-Technological Center in Russian Federation. The system allows you to solve your water purifying problems caused by any type of pollution, on a new qualitative level with less capital costs, including the pollution by surface-active contaminants, oil products, heavy metals, any liquid industrial waste, as well as purify and desalt salted aquatic environments with various pollution levels with no need in any consumables during the operational process.

Unique plant for water purification and seawater
desalting, which has no analogues in the world. New know-how technology.