stainless water tank panel

6.7 The water quality should confirm to the requirement of , especially, chloride ion content in water should be controlled strictly less than 25mg/l in case of causing pitting, stress corrosion, crevice corrosion which are easy to damage water tank. Also, it is strongly suggested that SUS316L or SUS444 only can be used in coastal areas.

Closed the exit of water and sewage, opened the inlet valve, as well as filled with water for about 3 hours, the tank would be considered as qualified product if it has no any leak, abnormal noises and deformation during these time.

6.6 Acceptance Check

The water tank will be installed by our professional engineers with argon arc welding at users spot. The servicing space of at least 500mm should be left on all sides of the tank, and 400mm space at least for service should be left at the top of between tank and roof. The spot should be orderly and clean. Additionally, heat Preservation could be covered and made according to the users requirements.

6.5 Water tank Installation

Usually, they are hydraulic float-valve or common float-valve at the exit of inlet-water pipe. And if it is needed that valves should be installed vertically, the inlet-water pipe ought to be opened at the top of tank. Worthily mentioned, users should be charged for their other special accessories, such as content gauge or over-flow signal pipe, etc. 

6.4 Accessories By Contract

The conventional accessories have inlet-water pipe, outlet-water pipe, over-flow pipe, sewage-off pipe, ventilated hole, man hole, inside latter, outside latter, and the base of galvanizing irons. The contract attachment should illuminate technical parameters such as pipe diameter, direction, connection type, and other special requirements.

6.3 Conventional Accessories of water tank

The modular stainless water tank is applied as the water tank in the field of construction industry and fire protection, as the storage vessels in the field of beverage industry, and the storage equipments in the field of food, chemical, medical, and metallurgical industry, etc.

6.2 Range Of Application

According to 92SS177,93S178 , JB/T4735< Hygienic Standard Of Atmospheric Steel Container >, GBJ15-88 ,GB17219.

6.1. The Inspection Standard of Design and Manufacture

6. The Explanation of Design

950.00

1000.00

KC-1000

49.50

55.00

KC-55

855.00

900.00

KC-900

45.00

50.00

KC-50

790.00

840.00

KC-840

40.50

45.00

KC-45

760.00

800.00

KC-800

36.00

40.00

KC-40

684.00

720.00

KC-720

33.60

36.00

KC-36

570.00

600.00

KC-600

27.60

30.00

KC-30

532.00

560.00

KC-560

21.60

24.00

KC-24

475.00

500.00

KC-500

20.70

22.50

KC-22.5

420.00

450.00

KC-450

18.40

20.00

KC-20

380.00

400.00

KC-400

16.20

18.00

KC-18

336.00

360.00

KC-360

14.40

16.00

KC-16

280.00

300.00

KC-300

13.80

15.00

KC-15

228.00

240.00

KC-240

10.80

12.00

KC-12

190.00

200.00

KC-200

9.20

10.00

KC-10

168.00

180.00

KC-180

7.80

9.00

KC-9

140.00

150.00

KC-150

7.20

8.00

KC-8

112.00

120.00

KC-120

5.20

6.00

KC-6

95.00

100.00

KC-100

3.60

4.00

KC-4

84.00

90.00

KC-90

2.60

3.00

KC-3

76.00

80.00

KC-80

1.60

2.00

KC-2

66.00

70.00

KC-70

1.30

1.50

KC-1.5

56.00

60.00

KC-60

0.80

1.00

KC-1

Actual Cubage

m3

Theoretic Cubage

m3

Model

Actual Cubage

m3

Theoretic Cubage

m3

Model

5. The Guide To Type Selection For its non-inflammability, it features a distinct strongpoint as storage of supplying-water for extinguishing fire which accords with the fire protection and construction basic laws. 4.6. According with the Fire Protection and Construction basic laws The tank enjoys graceful lines, unique appearance and perfect design. 4.5. Handsome Appearance Due to its modular plate(1m

Stainless water tank panel
1.Material: stainless steel
2.The specification for standard plate: 1m*1m, 1m*0.5m

try water tanks    to get through more products