Siliphos(Power-Phos)--D17mm

SILIPHOS SYSTEMS have been installed with great success in private houses, hotels, office buildings, schools and hospitals for the treatment of potable water. They are also applied in small and medium sized industrial estates for the treatment of cooling systems, autoclaves, machine cooling etc.

SILIPHOS DISPENSERS should be refilled when 1/3 of the content is used up, normally only affer appr. 3 - 6 months, this depends on the individual installation.

The dispensers are installed in the water system and filled with the SILIPHOS Spheres. The tap water flows through the dispenser and dissolves minute quantities of polyphosphates. SILIPHOS dispensers dont cause a critical pressure drop in the water mains.

2. SILIPHOS Dispensers

A sparingly soluble glass - like polyphosphate silicate combination of highest purity.

1. SILIPHOS Spheres

The SILIPHOS System:

Refilling is very easy and a complete change of SILIPHOS is recommended every 12 months.

SILIPHOS dispensers can be installed in almost every water system. They require no electric installation and hardly any maintenance. They only have to be refilled with spheres every 3 - 6 months.

SILIPHOS Dispensers

extends the life of your water installation.

helps to save energy

saves expensive repairs or even replacement of water pipes, boilers, heaters, cooling systems etc.

prevents so-called brown or red water and clogged pipes

protects water systems in hotels, public buildings, private households and industry against scale formation and corrosion.

SILIPHOS Features

As a rule of thumb one can say that 1mm scale on the heating coils of a boiler, increases the energy cost by 15%.

Experience shows that scale and corrosion is not only found in galvanized but also in copper pipes. Even in plastic pipes one can find scale and deposits.

SILIPHOS will also slowly remove existing scale in old pipes if it consists of brown scale, i.e. Ironoxide. Hard scale, i.e. calcium carbonate cannot so easily be removed by SILIPHOS. Here the advantage is again that SILIPHOS will prevent further scaling up.

concentrations of polyphosphates are sufficient to inhibit the deposition of scale onto metallic surfaces. Because of its phosphate and silicate content SILIPHOS also inbibits corrosion by forming a thin protective layer on the metal surface. A SILIPHOS concentration of 2 - 3 ppm is sufficient to achieve both of these effects.

SILIPHOS prevents scale and stops corrosion. It utilizes the phenomenon that minute

SILIPHOS is an economic and reliable water treatment system for potable and industrial water. It consists of glass-like polyphosphate silicate spheres and dispensers of variable size.

SILIPHOS is an economic and reliable water treatment system for potable and industrial water.SILIPHOS prevents scale and stops c