Conductivity Meters

LCD  / LED

0.1 mili seimens
( 100 m s )

0- 199.9 mili seimens ? s

RO Feed /  Cooling Tower Auto Blow Down System

LCD / LED

10

0- 1999 X 10 ? s

RO Feed /  Cooling Tower Auto Blow Down System.

LCD / LED

1

0-  9999  ? s

DM  Plant / RO Plant

LCD / LED

1

0 1999 ? s

High  Purity  Water.

Avaialble at Extra Cost.  Only   with  LED  Display.
Isolated Output  on  Field  Monitor.
Source  available within the  Meter.
Max.  Loop  impedence  less than 250 Ohms.

LCD / LED

0.001

0 1.999 ? s

Application

4 20 Amp. Signal

Display

Resolution

Range

CT 650   with  4 20 mAmp  output.   This  meter  is  available  in  all  the  above   Ranges.  Ideally   suitable    
    when   Long  Cable  lengths  are  required.  Has 
            
            Display  in  Panel  as  well   as  in  Field.

CT 650  for  Ultrpure  High  Purity  Water.
Range   from  0  to  1.999  microseimens
Display  Available  in  Resistivity  Also  up 18 mega ohms.

Choice of Panel Mounting or Field mounting :- Unique design with IP 65 protection makes meter field as well as panel mounted. A separate panel mounted enclosure is also available.
Choice of longer cable lengths with 4- 20 mAmps transmitter for remote indication.

Choice of Two Sensors :- You can connect 2 sensors to one meter to make entire instrument very economical. This meter is made specially keeping in mind all the requirements of water treatment industry.

Display Both TDS and Conductivity :- You can select the unit of display i.e microseimens for conductivity or ppm for TDS.

Inbuilt Buzzers / Ack. Button / Audio Visual Alarm :- This ensures that for small plants no need to go for costly electrical hooter and acknowledgement accept / reset buttons. All these features are inbuilt in the meter.

Easy calibration / Traceability to ERTL / NABL :- Calibration is done using front keys. No need to open the meter for calibration. All the meters are calibrated with master meters having traceability to ERTL / NABL.

Control Delay :- Every time RO plant or DM plant is started meter will ignore the reading for programmed control delay time so that plant can be started smoothly without unnecessary tripping / alarms and plant can be started directly in Auto Mode.

We can also provide meter with higher conductivity ranging to few lacs microseimens.

Auto Ranging :- One Meter is suitable for range of 0 to 20,000 microseimens.

We   have   following   ranges  of   Digital   Online   conductivity  /  TDS  meters.