SEWAGE TREATMENT

Domestic waste water treatment plant of any city consists of collection. Treatment and disposal. In conventional centralized sewage treatment system, about 80% of the cost is accounted for the collection. The cost of collection of sewage and its conveyance to the terminal point in the large cities s very high. Further, the depth of sewer goes on increasing with the increase of length of sewer line and pumping of the sewage at the intermediate and terminal points requires a lot of energy. In centralized treatment system volume of the sewage becomes very large and the distance of conveyance, as the sewage treatment plants are generally located outside of the cities, is very long. Further CTS aggravates the environmental problem also, because of large volume of the waste water of the entire city is discharged at one place.

In decentralized treatment system, a balance between the advantages of large scale treatment in terms of economics of scale and individual responsibility for domestic waste water treatment plant can be obtained by providing colony wise/sector-wise treatment system. Responsibility of construction as well as operation and maintenance may be taken up collectively by the residential colonies! builders developers. Specific treatment technology should be selected as per the prevailing ground situation like availability of the land etc. Keeping in mind all these points Water Vatkia Engineers (P) Ltd. offer decentralized state of the art following package sewage treatment system.

After biological treatment water may be recovered by adopting tertiary treatment, that may be used for gardening/flushing and other utilities. The Compact Package plant is simple to operate, requires minimal maintenance, it requires minimum power, land & consumables for reducing operating cost. These are generally manufactured in MS epoxy coated or Stainless steel/FRP as per the specific need. These compact plant are ideal for hotels, hospitals, holiday resorts, country/golf clubs, schools, housing complexes, national parks & industrial commercial complexes. we highlight the advantages of smaller decentralized local units for treatment of communal waste water/sewage especially in area where developing urbanization has to integrate with the environment.

SEWAGE TREATMENT
With the increasing scarcity of water and consequent increase in the cost of raw water, a need is felt to recycle and reuse water. Water resources are increasingly strained by rapidly expanding metropolitan areas and industrial growth. In many areas, the water demand exceeds supply. More and more industries are looking at not only reduction in water consumption but reuse of effluent after treatment. Another avenue explored is reclamation of sewage for use by industry.

Domestic waste water management system of any city consists of collection. Treatment and Disposal. In conventional centralized sewage treatment system, about 80% of the cost is accounted for the collection. The cost of collection of sewage and its conveyance to the terminal point in the large cities is very high. Further, the depth of sewer goes on increasing with the increase of length of sewer line and pumping of the sewage at the intermediate and terminal points requires a lot of energy.

In centralized treatment system volume of the sewage becomes very large and the distance of conveyance, as the sewage treatment plants are generally located outside of the cities, is very long. Further CTS aggravates the environmental problem also, because of large volume of the waste water of the entire city is discharged at one place. In decentralized treatment system, a balance between the advantages of large scale treatment in terms of economics of scale and individual responsibility for domestic waste water treatment system can be obtained by providing colony wise/sector-wise treatment system. Responsibility of construction as well as operation and maintenance may be taken up collectively by the residential colonies! builders developers. Specific treatment technology should be selected as per the prevailing ground situation like availability of the land etc. Keeping in mind all these points Water Vatkia Pvt. Ltd.. offer decentralized state of the art following package sewage treatment system.

  • Country:India
  • telephone:91-91 11 26371622
With the increasing scarcity of water and consequent increase in the cost of raw water
*Your name:
*Your Email:
*To:HAL Water Vatika Pvt. Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Treatment Pump

Treatment Pump Cosmetic treatment pumps are a kind of mechanical device with sealing function, releases a content in a predetermined form by pressing to generate a vacuum environment and has a sealing property. Products Description The working principle of Treatment Pump is ...

Come From ZHEJIANG B.I. INDUSTRIAL CO., LTD.

EDI PLANT WATER TREATMENT

EDI PLANT WATER TREATMENT EDI plant water treatment module is usually placed behind the reverse osmosis system, which not only overcomes the lack of deep desalination of reverse osmosis effluent, but also further removes trace carbon dioxide, residual salt, silicon dioxide, ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

CROSSFIRE® Carboxin 13%+Thiamethoxam 18%+Thiram 13% 44%FS Seed Treatment

Product Introduction Carboxine 13% + Thiamethoxam 18% + Thiram 13% 44%FS. Product Feature This product is an insecticide and bactericide composed of three active ingredients. Among them, Carboxin is a selective systemic fungicide that can penetrate plant lesions and kill germs. ...

Come From Chico Crop Science Co., Ltd.

Nonionic Flocculants for Industrial Wastewater Treatment

SINOFLOC nonionic flocculants are high and very high molecular weight nonionic polyacrylamide polymers, in dry powder character. Our products have been specially designed for the industrial wastewater treatment process including paper, textile, and food industry and produced ...

Come From Beijing Sinofloc Chemical Co.,Ltd.

Medical Treatment

Jlymim provides basic surgical instruments, biopsy forceps, high frequency electric knife nickel and forceps, stapler, orthopedic surgical robot parts and other complex and precise parts for medical treatment. From customized selection of concept raw materials to manufacturing, ...

Come From KUNSHAN JINLONGYUAN NEW MATERIAL TECHNOLOGY CO.LTD

WATER PRE-TREATMENT

Based on the quality of different raw water, we are committed to providing customers with customized solutions. Modular design is adopted, with reasonable and compact structure, beautiful appearance and convenient daily maintenance and operation. Equipped with double softeners, ...

Come From Nanjing Biocell Environmental Technology Co., Ltd

SUBMERSIBLE SEWAGE PUMP

GNWQ vertical submersible sewage pump is a sewage submersible cutter pump, which is designed to transport sewage and waste. Its cutting part has a unique spiral structure and a sharp edge design. Material Rockwell hardness above HRC49-52 (special materials need to be customized ...

Come From All Pumps Machinery Company Limited1

Submersible Slurry Sewage Pumps for Sale

GNWQ series sewage cutting pump non-clogging submersible sewage water pump is suitable for 0-20 meters, large flow, medium and low head use, full head, low energy consumption. The product also adopts an easy-to-remove cutter head design, which can be replaced with different ...

Come From All Pumps Machinery Company Limited1

Hot dipped zinc coating surfacement treatment U Channel post perforated tube

Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A499, Grade 60. All kinds of specification including 1.12lbs/ft, 2.00lbs/ft, 2.03lbs/ft, 2.08lbs/ft, 2.10lbs/ft, 2.25lbs/ft, 2.50lbs/ft and more. 3/8\'\' or 7/16\'\' diameter holes on ...

Come From Better Products Co.,

Hot dipped zinc coating surfacement treatment square post perforated tube

Posts are manufactured conforming to FHWA and ATSSA standard. Steel material conforms to ASTM A1011, Grade 50. Yield strength after cold-forming is 60,000 psi minimum. Posts are manufactured from hot-dipped galvanized steel conforming to ASTM A653, G90 or G140. The posts are ...

Come From Better Products Co.,