Waste Water Heat Recovery Equipments

Supermizer, a high performance heat exchanger, has been developed with a view to export to the Japanese markets at the request of many public bathhouses of Japan, where the installation spaces for the bathhouses are relatively narrow and small.*. Able to install in the small narrow areas from its compact design. *. Able to install on the aboveground or on the rooftop from its pumping method design.*. Operating automatically only when wastewaters are fed into pumps.*. Securing complete heat insulation that prevents freezing during the wintertime even when installed outside of the door.*. Long equipment life using the durable cupronickel tubes.*. High efficiency with use of specially designed spiral tubes.Close valve A at all times, while remaining opened valve B and valve C.Normal mode operation with valve 1 and valve 2 closed, and valve 3 opened.Start operation after opening all the air valves. Check the water flow into the air valve, and then close.When daily operations are completed, switch off the pumps.Close valve 3 and open valve 1 and valve 2, then reverse clean for a 1 ~ 2 minutes. Return to the original value conditions. AAdg Standard Capacity A B C D E F G H I J K SM500- 10/H 50A 50A 50A 50A 590 320 500 2000 650 360 790 SM250- 5/H 50A 50A 50A 50A 490 250 430 2000 650 310 690 By flowing both hot water and cold water through the equipment under actual conditions, every heat exchanger manufactured in our plant is 100% thoroughly inspected before being shipped out. The equipments that passed the inspections are only put to the market.3Measurement Device for Surplus Recovery Performance