MEMBRANE - 8340-SB20-TSOA

The SB series of membrane elements from TriSep are available in 2.5", 4", 8", 8.3", and 8.5" diameters. There are three different membranes offered, the SB20, SB50, and SB90. The SB20 offers the highest rejection at 98%, while the SB50 offers 20% higher flow at 95% salt rejection. The SB90 is a nanofiltration (NF) membrane operating at about twice the flow of the SB20 at 85-90% rejection.

But in many applications, CA membranes operate very well and give long and usefull service lifes. They have an advantage over the newer polyamide membranes for applications with high organic fouling, such as wastewaters, and waters where biological growth is an issue (easily addressed using chlorine). There is large installed base of CA membranes in many different applications, and the SB series of membrane elements from TriSep can satisfy most retrofitting or new system applications.

TriSep Cellulose Acetate RO Membranes SB20, SB50, and SB90
 
Cellulose acetate (CA) membranes were the first commercialized RO membranes developed in the late 1960's. CA membranes offered a good combination of rejection, fouling resistance, and the ability to tolerate continous chlorine up to 1.0 ppm. Some of the reasons they lost favor to the new polyamide membranes was the requirement for acidification (CA membranes should be operated at a pH of between 4-6 to minimize hydrolysis), lower rejection (98% versus 99.5%) and higher net drive pressure requirements (300 psi/20 bar versus 150 psi/10 bary).