Model 125E Wastewater Evaporator

The Model 125E is an electrically heated waste water evaporator designed for the small to medium sized generator  of wastewater.  It comes in two models, the Model 125E Carbon Steel version and the Model 125E-SS 316L Stainless Steel version (tank, floor, lid, covers, and stack are 316L SS).  Typical applications include minimizing wastewater from machining operations, parts washing equipment, compressor condensate, mop water, die cast solutions, and many other water based waste streams.  Installation is easy consisting of only an electrical hookup and a 10" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump.  After an initial  heat up time of approximately one hour, the Model 125E will evaporate from 10 to 14 gallons per hour of water.  The Model 125E will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.