Sell astm a106 seamless carbon steel pipes @China (Mainland)

We are a factory specialized in steel pipes, which have been approved by ISO and API. We have strict quality control system.
Detailed introduction to ASTM A106 seamless carbon steel pipes:
1)Name: ASTM A106 seamless Carbon steel tube 
2)Steel grade: GR.A, GR.B,GR.C 
3)Offer Size:O.D:10.3mm-168.3mm W.T:1.24mm-19.05mm L(max):16000mm 
4)Surface: Paint black,with two plastic caps on the each end 
5)Packing:Hexagonal bundles with several steel strips, Wrapped in waterproof paper, if necessary packed with woodencase 
6)Mimidium:2 tons(some specification are excepted) 
7)Dealivery time:15-30 days according to the actual quantity 
8)Inspecition:according to the standard requiremet and offer the MTC (EN10204.3.1/3.1B) 
9)Place of orgin: China

This standard is issued under the fixed designation A 106; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon indicates an editorial change since the last revision or reapproval.

This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense.

1.Scope

1.1 This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1/8 to NPS 48 inclusive, with nominal (average) wall thickness as given is ANSI B36.10. Pipe having other dimensions may be furnished provided such pipe complies with all other requirements of this specification. Pipe ordered under this specification shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized (Note 2).

NOTE 1 Α Consideration should be given to possible graphitization of the material at the higer temperatures at which it may be used.
NOTE 2 Α Grades A rather than Grades B or Grades C pipe should be used for close coiling, or cold bending. The purpose for which the pipe is to be used should be stated in the order. This note is not intended to prohibit the cold bending of Grades B seamless pipe.

1.2 Supplementary requirements (S1 to S4) of an optional nature are provided for seamless pipe intended for use in applications where a superior grade of pipe is required. These supplementary requirements call for additional tests to be made and when desired shall be so stated in the order.
1.3 When these products are to be used in applications conforming to ISO Recommendations for Boiler Construction, the requirements of Specification A 520 (Mechanical Property Requirements Section) shall supplement and supersede the requirements of this specification.
1.4 The values stated in inch-pound units are to be regarded as the standard.

NOTE 3 Α The dimensionless designator NPS (nominal pipe size) has been substituted in this standard for such traditional terms as "nominal diameter", "size", and "nominal size".

1.5 The following precautionary caveat pertains only to the test method portion, Sections 11, 12, 13, 14, and 15, of this specification; This standard does not purport to address all of the safety problem, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

标准	牌号	化学成分（％）
		C	Si	Mn	P	S	Cr	Mo	Cu	Ni	V
ASTM A106	A106 Gr.A	≤0.25	≤0.10	0.27～0.93	≤0.035	≤0.035	≤0.40	≤0.15	≤0.40	≤0.40	≤0.08
	A106 Gr.B	≤0.30	≤0.10	0.29～1.06	≤0.035	≤0.035	≤0.40	≤0.15	≤0.40	≤0.40	≤0.08
	A106 Gr.C	≤0.35	≤0.10	0.29～1.06	≤0.035	≤0.035	≤0.40	≤0.15	≤0.40	≤0.40	≤0.08

Tag:

ASTM A106 seamless Carbon steel tube

ASTM A106 seamless pipe

ASTM A106 Gr.A steel pipe

ASTM A106 Gr.B steel pipe

Fluid steel pipe ASTM A106 Gr.B

A106 hot expanded seamless steel pipe

ASTM A106 steel pipe

ASTM A106 Carbon steel tube

C.S Seamless ASTM A106 GR.B PIPE

+ view more

+ASTM A335 P22

+ASME A213 T12

+ ASTM A335 P11

+ASTM A335 P91

Sunny Steel Enterprise Ltd.
This inventory is part of the inventory, demand and other models in stock or order materials, please contact us.
Phone: 0086-21-33780199 / Fax: 0086-21-51079722
Please send the full data by e-mail: sumxu@163.com or sales@sunnysteel.com
Http://www.sunnysteel.com

Post by Sum Xu    Construction & Real Estate    @2012-05-25 20:23:52