Application :
1 .500 meters between the main engine and the sensors .
2.DC and AC can be selected
3.you can remote control setting up the parameter , installed conveniently
4.Supply the high or low switch signal , RS485 output .
5. preventing Disturbance well
6.Airtight structure , No Corrosion .
Specification 1 .Resolution 1mm/1cm 2.Measuring error : 0.2%( full range) 3.Display : Two lines ,14 letters,LCD Display (back light ) 4.Signal output : DC 4-20mA RS485 5.Outpot load : 0-500Ω 6.Relay output : higher alarm /lower alarm 7.Relay mode : always open 8.relay quatity: 2 or 4 9,relay specification : 5A 250VAC /30VDC 10 RS485 standard level 11.power supply : HLMLD : DC24V (±10%) 0.1 A HLMLA: AC220V(±20%) 0.1 A
12.Measure Cycle :1 second ( can change)
13: Temperature : -40ºC~85ºC
14.Crust Material :ABS
15.Outer cover :IP67
16.Cable Fix: PG9/PG11/PG13.5
17. Parameter Set Up: 3 induction buttons
18.Installation :wall mount ,clamp on
19.Dimension : 186*183*126mm
|
Post by Jerome Ji Measurement & Analysis Instruments @2012-06-21 08:44:43