Sell output ac choke for schneider inverters em-rao3 three phase @China (Mainland)

Feature:

Inverter output ac line reactor, ac choke, and harmonic wave lower 2%.

1      system voltage: 3phase AC380v-440V

2      rated current:1.8A-1250A

3      Input reactor: 0.75kw-600kw

4      Using frequency: 0-60Hz.

5      Altitude: <100 0 meters

6      Environment temperature: -25℃ ~ 40℃

7      all copper and silicon steel sheet

8      Small size, light weight, small footprint, easy to install.

9      Increase Drive System Reliability

10    Reduce Harmonics; Reduce Surge Currents; Reduce Voltage Doubling Effects.

11   Improve True Power Factor.

12   all-copper wire and silicon steel sheet

13   elegant design

14    noise level: <40db

15   standard:IEC289:1987

16   Protection class: IP00

17   Insulation class: H

18   Standard: IEC289: 1987 Reactor

19   GB10229-88 Reactor (equivalent to IEC289:1987)

20   JB9644-1999 Reactor for semi-conductor transmission

21   Insulation Resistance: 1000VDC, insulation resistance≥100MΩ.

22   Reactors are used vacuum dipping process, the high temperature bake curing. Coil has good insulation properties, the overall mechanical strength, moisture resistance;

23    coil is F, H class insulation system, greatly improving the reliability of long-term operation;

24    low temperature, low loss, low cost, utilization rate;

25   The Output reactor to limit the form of harmonic wave feedback circuit. They can also be reduced because of the converted DC Link Capacitor input rectifier caused by AC current and frequency; baseline reactor pressure drop UD = 2%, with a feeder unit for the drive and automatic operation of the transformer, but also for uk< 1% of the system operation.

Function:

1. Reduction of harmonic wave, Improvement of the power factor.

2. Over-voltage restriction and protect the motor and output cable.

3. Reducing the stress caused by noise to motor extended the life span of motor.

4. Improvement of low-frequency conduction emission/sensitivity.

Model	Voltage	Power	Current	G.W	Packing size	Installation dimension
	(V)	(KW)	(A)	(KG)	L/W/H(mm)	H/W/D(mm)
EM-RAO3-d75	400	0.75	1.8A	2	120/76/110	70/47/Ф7
EM-RAO3-1d5	400	1.5	2.5A	2.2	120/76/110	70/47/Ф7
EM-RAO3-2d2	400	2.2	5A	3	120/92/120	70/47/Ф7
EM-RAO3-004	400	4	10A	4	130/80/138	75/60/Ф7

Post by Daniel Li    Electrical Equipment & Supplies    @2012-07-18 10:31:34