Sell coal crusher,coal pulverized @China (Mainland)
(1) Tooth-roller
Tooth-roller is the key component of crusher, spiral arrangement of teeth. The toothholders and principal axis are assembled using the multiple dove-tail grooves, which enhance the shear strength.Small size materials are sieved out by two tooth-roller which rotate inward synchronously in opposite direction, and the massive materials are crushed by the broken tooth.Broken tooth is casted by adopting special formula which fuses multiple rare elements. It is quenched after processing,make it higher strength as well as toughness,better abrasion resistance
and longer service life.
(2) Shaft coupling
Plum-shaped elastic coupling with high-performance polyurethane are applied,greatly reduce the impact and vibration from tooth-roller to reducer.
(3) Over load protector
Speed detection sensor over load protection ensure safe production. The senor is connected with PLC programmed control monitoring equipment. The electromotor can be manually reversed
to remove blocked material and prevent material being blocked. Distance control can be realized through PLC programmed controller. The running condition can be monitored through control room.
100 Series grading teeth-roller crusher for coarse crushing:
|
Model Specification
|
2PLF-D100/150 |
2PLF-D100/200 |
2PLF-D100/250 |
2PLF-D100/300 |
|
Max. Feed Size(mm) |
≤1200 |
≤1200 |
≤1200 |
≤1200 |
|
Discharging Size(mm) |
300-400 |
300-400 |
300-400 |
300-400 |
|
Capacity(t/h) |
≥1500 |
≥2000 |
≥3000 |
≥4000 |
|
Motor Power(kw) |
315-355 |
355-450 |
450-560 |
560-630 |
80 Series grading teeth-roller crusher for medium crushing:
|
Model Specification |
2PLF-D08/16 |
2PLF-D08/20 |
2PLF-D08/25 |
|
Max. Feed Size(mm) |
≤600 |
≤600 |
≤600 |
|
Discharging Size(mm) |
50-150 |
50-150 |
50-150 |
|
Capacity(t/h) |
280-850 |
350-1000 |
500-1500 |
|
Motor Power(kw) |
160-200 |
160-250 |
200-315 |
50 Series grading teeth-roller crusher for medium crushing:
|
Model Specification |
2PLF-D05/06 |
2PLF-D05/12 |
2PLF-D05/15 |
2PLF-D05/20 |
|
Max. Feed Size(mm) |
≤300 |
≤300 |
≤300 |
≤300 |
|
Discharging Size(mm) |
50-150 |
50-150 |
50-150 |
50-150 |
|
Capacity(t/h) |
80-240 |
200-600 |
250-700 |
300-800 |
|
Motor Power(kw) |
37 |
75 |
90 |
160 |
Post by Alina wang Manufacturing & Processing Machinery @2011-10-12 15:57:43
Contact with Alina wang
Social Connect
Contact Us
- ShaoYaoJu , ChaoYang district , Beijing , China