Sell sell fiber laser marking machine @China (Mainland)

sell Fiber laser marking machine

High speed fiber laser marking machine
Fiber series high-speed fiber laser marking machine adopts the internationally fiber laser for the development of a new generation of fiber laser marking system. It has many advantages as follows: machine is smart, the quality of output beam is good, the accuracy of marking is very high and the depth is nice. It can be maintenance-free operation for a long time with using air-cooling method.. It is widely used in mark field of smooth finish and high precision, such as steel, copper, aluminum, gold and silver, and most other metals, plastics, ceramics, electronic equipment. And be suitable for watches and clocks, mold, bitmap marking, packaging, health care, tobacco, Sanitary Ware, food, electronics, gifts and other industries It is the best choice of high-speed precision marking.

 

Characteristics of fiber laser marking machine:
1. Excellent beam quality: This series of machines are much better than the traditional marking machine, condensation diameter is less than 20um, divergence angle is 1/4 of the semiconductor pumping source laser, used in accurate marking.

2. Low use-cost: high turnover ratio between electricity and laser, the whole machine power consumption is less than 500W, which is 1/10 of light pumping source laser.

3. Maintenance-free Operation: There is no need of any maintenance for laser, or to adjust /clean the lens.

4. Long working life: using laser diode as pumping source, the working hours can reach as long as 100,000 hours.

5. Small machine body can be used in severe environment: using fiber to realize laser transport and the structure is compact, which makes possible to work under severe environment such as Shock and vibration, high-temperature.

6. High processing speed: 2-3 times of the traditional laser marking machine. Widely used in the field of high requirements of depth, Smoothness and precision, such as jewelry, decoration, paper packing, auto parts, electronic hardware, sanitary, glass and bitmap. It can also works on metal and plastic surface.

 

The main technical parameters:

Model:LN-Fiber  

Laser :ytterbium-doped fiber

Laser Power:10W/20W 

Laser Wavelength:1055-1070nm 

Laser Repetition Rate:20-100KHZ

Marking Area:110*110mm 

Marking Wire-speed:<=12000mm/s

The Min. line Width:0.012mm

The Smallest Characters:0.1mm

The Repeat Accuracy:±0.003mm

The Whole Power:400W/500W

Electricity:220V/Single phase/50HZ/4A

Work environment:Temperature:5~2.C, humidity<80%

Dimension:900*720*1400mm  Weight:100KG

Option device:

1. D80  D50
2. Marking Area(mm) 62*62  125*125  155*155  175*175  230*230
(The larger the marking areas are, the thicker the marking spots will be as well as the shallower marking depth. If it is used for precise marking or deep marking, it is better to choose smaller marking area.)

Contact us:

Email: sales@lasermarkerchina.com

MSN:laserchina90@hotmail.com

Skype:feiyuebest

Website:

http://www.lasermarkerchina.com/

http://www.lasercutterchina.com

Post by James Huang    Manufacturing & Processing Machinery    @2011-11-17 15:26:54