Sell hot runner system @China (Mainland)
plastic hot runner injection mould is the main key of the injection mould.Heating elements is the mainly hot runner mould structure.Hot runner application is used widely in the injection industry.
Hot runner technology is one of the advanced technology in plastic injection mould field and increasingly be widely application.However,hot runner mould structure is complex,high value and the maintenace fee is very high.Moreover,easy to appear the melt plastic lealage,heating components demage problem and so on.These phenomena strictly limitted hot runner system widely application.
There is a monolithic hot runner system,like the picture 1.
Screw make the hot runner manifold and nozzle connect together,form the whole hot runner system structure.Make the hot runner manifold and nozzle corresponding in alignment.Avoid the blind angle apperance.Thus prevent the plastic melt leakage between this two parts.
Compared with the common using hot runner,monolithic hot runner system use the mould locking and prestreching realised the difference with the the mould alignment.Therefore make the coonection area smaller,then decrease the thermosteresis,improve the temperature distribution curve.
It's monolithic hot runner technology advantage.If you need for information about that or you are interested in Anole hot runner,welcome to make the detail consultation.
Tina
skype:anole-01
service1003@anole-hot-runner.com
Post by Emily Tina Rubber & Plastics @2012-12-26 07:36:06
Contact with Emily Tina
Social Connect
Contact Us
- ShaoYaoJu , ChaoYang district , Beijing , China