Details : | |
Optcore OHP3G-R10xCR series are high performance, cost effective single channel 3G HD digital video SFP receiver module designed to receive optical serial digital signals as defined in
SMPTE 297-2006. These single channel 3G HD video SFP receiver modules are specifically designed for robust performance in the presence of SDI pathological patterns for SMPTE 259M, SMPTE
344M, SMPTE 292M and SMPTE 424M serial rates. They are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. These 3G HD digital video SFP receiver modules receive the wavelength
from 1200nm to 1610nm over single mode optical fiber (SMF). The maximum transmission distance of 10km is achievable with 3Gbps pathological signals.
The SD-SDI/HD-SDI/3G-SDI Video SFP receiver also provides an optional Digital Diagnostic functions to monitor extensive Output optical power, bias current, supply voltage and operating
temperature. These SD-SDI/HD-SDI/3G-SDI Video SFP receivers are RoHS compliant.
Features
• SMPTE 297-2006 Compatible
• Multirate from 50 Mbps to 3Gbps
• Single-mode Fiber
• Maximum distance of 10km under worst case conditions and 3G-SDI video pathological Signals
• Support Video Pathological Patterns for SD-SDI,HD-SDI and 3G-SDI
• Single 1310nm PIN receiver
• SFP MSA Compliant
• Optional Digital Diagnostic functions available through the I2C interface
• Single +3.3V power supply
• Low Power Consumption
• RoHS compliant
Specifications
• Form Factor: Video SFP Receiver ( Single Receiver)
• Data Rate: 50Mbps to 3Gbps
• Wavelength: 1200~1610nm
• Fiber Type: SMF
• Max Distance: 10km
• Optical Components: PIN
• Operating Temperature: 0~70ºC(Commercial)
• Diagnostics: Optional
• Connector: LC
• Application: SMPTE 297-2006 compatible optical-to-electrical interfaces such as SMPTE 424M (3G-SDI 2.97Gb/s),SMPTE 292M (HD-SDI 1.485Gb/s),SMPTE 259M (SD-SDI 270/360Mb/s);High-density
Video Router&Fiber-Optic Video Transmission System; HD Video Broadcast cameras
|
Post by Cassie zhang Telecommunications @2013-03-25 09:42:54