Details : | |
Optcore OHP3G-RR40xCR series are high performance, cost effective dual channel 3G HD digital video SFP receivers module that is designed to receive optical serial digital signals as
defined in SMPTE 297-2006. These dual channel 3G HD video SFP receiver modules are specifically designed for robust performance in the presence of SDI pathological patterns for SMPTE
259M, SMPTE 344M, SMPTE 292M and SMPTE 424M serial rates. These 3G HD digital video SFP receiver modules receive the wavelength from 1200nm to 1610nm over single mode optical fiber (SMF).
The maximum transmission distance of 40km is achievable with 3Gbps pathological signals.
The SD-SDI/HD-SDI/3G-SDI Video SFP receivers also provides an optional Digital Diagnostic functions to monitor extensive Output optical power, bias current, supply voltage and operating
temperature. These SD-SDI/HD-SDI/3G-SDI Video SFP receivers are RoHS compliant.
Features
• SMPTE 297-2006 Compatible
• Multirate from 50 Mbps to 3Gbps
• Single-mode Fiber
• Maximum distance of 40km under worst case conditions and 3G-SDI video pathological Signals
• Support Video Pathological Patterns for SD-SDI,HD-SDI and 3G-SDI
• Dual 1310nm PIN receiver
• Optional Digital Diagnostic functions available through the I2C interface
• Single +3.3V power supply
• Low Power Consumption
• RoHS compliant
Specifications
• Form Factor: Video SFP Receiver ( Single Rx)
• Data Rate: 50Mbps to 3Gbps
• Wavelength: 1200~1610nm
• Fiber Type: SMF
• Max Distance: 40km
• Optical Components: PIN/PIN
• Operating Temperature: 0~70ºC(Commercial)
• Diagnostics: Optional
• Connector: LC
• Application: SMPTE 297-2006 compatible optical-to-electrical interfaces such as SMPTE 424M (3G-SDI 2.97Gb/s),SMPTE 292M (HD-SDI 1.485Gb/s),SMPTE 259M (SD-SDI 270/360Mb/s);High-density
Video Router&Fiber-Optic Video Transmission System; HD Video Broadcast cameras
|
Post by Cassie zhang Telecommunications @2013-03-25 09:47:21