Sell black sheets and dkp perforated channels and clips @Turkey
Galvanized, Stainless, Aluminum, Black Sheet And Dkp Welded Air Ducts
Circular cross-section air duct is produced by means of interlocking of galvanized steel plate in special machinery. Duct diameters, dimensions of duct connection parts, tolerances are being produced according to EN 1505 and 1506 and galvanized steel plate material is produced according to EN 10142. All duct parts, bends and connections are designed in the most suitable way in terms of noise level and aerodynamics. Production between 100 mm and 1600 mm diameter is being performed with spiral pipes formed with fully-automatic machines with sensitive tolerances. Maximum tightness is ensured in high pressures. Production of fittings duct parts are performed in CNC plasma cutting machine according to desired dimensions.
Welded Duct Productions;
Duct and fitting material productions, - Cutting and bending are performed on high sensitivity, in a way to minimize waster, in our Fully Automatic CNC Machines. - Welding is done by our welders with international certifications. - Both tightness and a very special look is ensured by means of using special CORNERS designed by KARSAC separately for galvanized, stainless, aluminum, black sheet and DKP materials.
According to SMACNA, DW 144,
- In interior and exterior surfaces, nonflammable paint resistant from 200 C up to 1000 C is used.
- Mineral wool, glass wool insulation is used as per customer request in order to eliminate sound, heat and humidity.
- Like the one we have in galvanized duct production, we also have a professional Black duct, aluminum andstainless mounting team.
- Nonflammable gasket and silicone is used to prevent leakage between ducts.
- It can easily be dismantled and mounted again.
Circular cross-section air duct is produced by means of interlocking of galvanized steel plate in special machinery. Duct diameters, dimensions of duct connection parts, tolerances are being produced according to EN 1505 and 1506 and galvanized steel plate material is produced according to EN 10142. All duct parts, bends and connections are designed in the most suitable way in terms of noise level and aerodynamics. Production between 100 mm and 1600 mm diameter is being performed with spiral pipes formed with fully-automatic machines with sensitive tolerances. Maximum tightness is ensured in high pressures. Production of fittings duct parts are performed in CNC plasma cutting machine according to desired dimensions.
Welded Duct Productions;
Duct and fitting material productions, - Cutting and bending are performed on high sensitivity, in a way to minimize waster, in our Fully Automatic CNC Machines. - Welding is done by our welders with international certifications. - Both tightness and a very special look is ensured by means of using special CORNERS designed by KARSAC separately for galvanized, stainless, aluminum, black sheet and DKP materials.
According to SMACNA, DW 144,
- In interior and exterior surfaces, nonflammable paint resistant from 200 C up to 1000 C is used.
- Mineral wool, glass wool insulation is used as per customer request in order to eliminate sound, heat and humidity.
- Like the one we have in galvanized duct production, we also have a professional Black duct, aluminum andstainless mounting team.
- Nonflammable gasket and silicone is used to prevent leakage between ducts.
- It can easily be dismantled and mounted again.
Post by Pelin Coruk Construction & Real Estate @2015-06-15 22:09:42
Contact with Pelin Coruk
Social Connect
Contact Us
- ShaoYaoJu , ChaoYang district , Beijing , China