Sell iec61000-4-5 lightning surge hi pot test equipment @China (Mainland)

Introduction:

 

Automatic lighting surge generator (or Lighting surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by the high-energy transient interference performance. Performance fully meets the IEC 61000-4-5, EN61000-4-5 and GB/T17626.5 standards.

 

 

Specifications:

 

Product Model SG61000-5 SG61000-5T SG61000-5H12 SG61000-5H
Output Voltage (Open) 1.2/50μs±20% 1.2/50μs±20% 1.2/50μs±20% 1.2/50μs±20%
Output Current (Short) 8/20μs±20% 8/20μs±20% 8/20μs±20% 8/20μs±20%
Output Impedance 2Ω and 500Ω 2Ω and 500Ω
Output Voltage Range 0~6KV±10% 0~6KV±10% 0~12KV±10% 0~10KV±10%
Output Current Range 0~3KA±10% 0~3KA±10% 0~6KA±10% 0~5KA±10%
Surge Repetition 1~9999 times 1~9999 times 1~9999 times 1~9999 times
Interval Time 20~9999s 20~9999s 20~9999s 20~9999s
Polarity Positive, Negative or Positive/Negative automatic
Phase Shift Asynchronous, Synchronization 0°~ 360° or Specific Angle
Coupling/Decoupling Network (CDN) Includes a 16A single phase CDN Includes a 20A 3phases CDN Includes a 30A 3phases CDN Built-in 20A 3phases CDN
Dimensions (WxDxH) 44x45x35cm 44x45x55cm 56x69x165cm 56x69x155cm
Gross Weight About 30kg About 48kg About 300kg About 270kg

 

Post by Raven L    Measurement & Analysis Instruments    @2016-03-07 17:03:31

  • Country:China (Mainland)
  • Contact Person:Raven L
  • Company:Lisun Electronics (Shanghai) Co., Ltd.