Sell 140ati03000 @China (Mainland)

affecting another channel. Each Analog

Analog Input (AI) Modules includes

Analog Input Modules require a sepa-rate external termination panel (ETP)

Analog Input Modules support hot-

backplane. Each module is mechani-cally keyed for proper installation in a

can operate properly with as many as

channel activates the Fault indicator for

chassis alarm signal. The module’s

correct data for every scan.

Failure of any diagnostic on any

Fault indicator merely reports a channel

fault, nota module failure—the module

input channel receives variable voltage

Input Module sustains complete,

modules on demand. In TMR mode,

one value is then selected using a mid-value selection algorithm to ensure

ongoing diagnostics for each channel.

performed in a manner that prevents a

replacement of a faulty module.

Sensing of each input point is

signals from each point, converts them

single failure on one channel from

spare capability, which allows online

the module, which in turn activates the

three independent input channels. Each

to digital values, and transmits the

Tricon chassis.

two faulty channels.

values to the three Main Processor

with a cable interface to the Triconex

Specifications

General

Accuracy: < .15% of FSR,from 0° to 60°C

Color Code: Yellow

Common Mode Range: -12V to +12V peak

Common Mode Rejection: -80 dB (DC-100Hz),typical

Current Range: 0-20 mA, 250 shunt

Input Overrange Protection: 150 VDC/115 VAC continuous

Input Resistance: (load) 30 M?(DC), min.

Input Update Rate: 55 ms

Isolated Points: No

Leg-to-Leg Isolation: 200 K?, typical

Module Status: Pass, Fault, Active

No. of Input Points: 32, diff, DC coupled

Power-Off Resistance: 30 K(DC), typical

Resolution: 12 bits

Type: TMR, AI

Voltage: 0-5V, + 6% (only 3700A)