Global Free Trade Posts |
COPPER SCRAPS,INSULATED COPPER WIRE SCRAPS,BARE BRIGHT COPPER WIRE,RADIATOR SCRAPS,COMPRESSOR SCRAPS for saleWE ARE SUPPLIERS OF METAL SCRAPS SUCH AS ALUMINIUM SCRAPS AND ITS FRACTIONS,COPPER SCRAPS,INSULATED COPPER WIRE SCRAPS,BARE BRIGHT...
Post by CT METALS [Hardware] @2013-02-23 14:49:07
The production line consists of one single forced feeding extruder, one single screw extruder, vacuum air venting device, fast net changing device and granule cutting device. The feeding part of the extruder is enlarged. The compressor has...
Post by Wells Wang [Security & Protection] @2013-02-23 10:22:12
The production line consists of one single forced feeding extruder, one single screw extruder, vacuum air venting device, fast net changing device and granule cutting device. The feeding part of the extruder is enlarged. The compressor has...
Post by Wells Wang [Security & Protection] @2013-02-23 10:19:07
It is equipped with special designed extruder used for polyolefine, has higher extrusion speed, higher plasticization. The special distributor type mixing screw and spiral type die head realize a reasonable flow channel and a smooth...
Post by Wells Wang [Security & Protection] @2013-02-23 10:15:58
PVC Fiber Reinforced Flexible Pipe Production Line The PVC Fiber Reinforced Flexible Pipe, also referred to grid pipe or snake skin pipe, is widely used to convey the middle pressure or corrosive gas and liquid. Now it is widely used in...
Post by Wells Wang [Security & Protection] @2013-02-23 10:12:50
Use and maintenance of the oil vehicle An oil vehicle at startup, should be careful not to make the oil pump reversal, so as not to cause the oil pump shaft seal blowing cause inhaled air. Lvyou car in the process, the oil pump may be...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 10:09:57
two stages Pelleti extrusion Machine The production line consists of one single forced feeding extruder, one single screw extruder, vacuum air venting device, fast net changing device and granule cutting device. The feeding part of the...
Post by Wells Wang [Security & Protection] @2013-02-23 10:09:40
Coalescence filter is processed by a special process by a variety of composite materials with hydrophilic characteristics, it can not only filter out mechanical impurities in the media, but also by demulsification coalescence, so from the...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 10:08:26
Description: gas separation filter is a lubricating oil in the gas separation device to ensure the lubrication system can work properly. Application range: petroleum, chemical, metallurgy, aviation, electronics, power, pharmaceutical,...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 10:06:51
PVC foamed board extrusion line This production line consists of special twin screw extruder, mould and auxiliary machines, our company will offer formulation and full sets of technology of the complete processes. The production line has...
Post by Wells Wang [Security & Protection] @2013-02-23 10:06:29
Feature High temperature,
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 10:05:11
1. Imported filter, uniform pore size, low resistance, high dust holding capacity. German imports the composite filter folding machine, increasing the filter effective filtration area. 3 oil temperature cyproterone resin glue and seal...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 10:03:21
PVC Pipe Extrusion Machinery Mainly used to produce U-PVC, C-PVC Huge Calibre Pipe for Supply an Drain Water. Composed of double screw extruder, pipe die, vacuum sizing device, multi-pedrails hauling machine, cutting machine and...
Post by Wells Wang [Security & Protection] @2013-02-23 10:02:27
Sintered filter: by multilayer metal sintering network, multi-layer stainless steel mesh been specially laminated suppress, after vacuum sintering has a higher strength and overall steel of a new type of filter material, the layers of wire...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 10:01:58
The engine in the work process to be sucked into a large amount of air, if the air does not go through the dust in suspension in the filtration, air is sucked into the cylinder, it will accelerate the wear of the piston group and a...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 09:59:38
Plastic HIPS Sheet Production Machinery Plastic Single Layer & Multi-layer Co-extrusion Sheet Extrusion Line HIPS sheet has the advantages of good processability, transparent, insulation and innocuity, environment friendly and...
Post by Wells Wang [Security & Protection] @2013-02-23 09:59:32
To reduce the frictional resistance between the relatively moving parts in the engine, reducing the wear of the parts, the oil is continuously fed to the friction surfaces of the moving parts, to form a lubricating oil film lubrication....
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 09:57:27
1. Imported filter, uniform pore size, low resistance, high dust holding capacity. German imports the composite filter folding machine, increasing the filter effective filtration area. 3 oil temperature cyproterone resin glue and seal...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 09:55:52
HDPE Large Caliber Water/Gas Supply Pipe Production Line Properties and advantages: the HDPE/MDPE water supply and gas supply pipe production line developed by our company has unique structure, features high automation, easy to operate,...
Post by Wells Wang [Security & Protection] @2013-02-23 09:55:34
Water separator filter oil - water liquid separation design, containing two filters, namely: poly filter and separation filter. For example, in the oil in addition to the water system, oil flows into the coalescence separator, first passes...
Post by [Mechanical Parts & Fabrication Services] @2013-02-23 09:54:09
