Global Free Trade Posts |
Details: The main parts are import from Europe,and used for tip cutting on feeding tubes,suction tubes,stomach tubes and Foley catheters etc. Including 17 pcs moulds. Can produce 1200pcs tubes per hour.
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 17:21:12
Details: 1.This bank is used for bending the tubes,make them bending, such as endotracheal tube. 2.Power distribution:220V,1.5KW,6copper core. Compressed air:without air Capacity:800-1000pcs/hours. Sizes:1200MM*740MM*1900MM
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 17:13:18
The development and manufacturing of Anesthesia mask product line ,the production line is adopted the international advanced and latest production technology, with high safety . The products are soft and comfortable, and the...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 17:06:11
1.Equipment configuration: The machine is used the mature and stable hot air heating forming, The design of machine is more flexible and mature and stable hot air heating energy regulation and step-by -step tubes pushing system, the...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:59:25
Equipment configuration: The machine is quipped with European heat source forming system, screen touch controlling system and Mitsubishi PLC control system .The machine with a stable performance and low fault rate. Production capacity:...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:53:37
Equipment configuration: Using mature and stable hot melting punch forming technology, Mitsubishi PLC control system, the disposition is high, the performance is stable, safe and low failure rate. Production capacity:...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:48:05
The main parts are import from UK,the cutting angle can be adjusted. It's air operated,Can be operated easily. This machine can be used on cutting kinds of tubes, for example suction tubes, stomch tubes,feeding tubes,foley catheter and so...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:42:35
Details: The main parts are imported from Japan, There are not burrs cause inside and outside of the forming holes, after forming the surface of inside and outside is smooth, the aperture size is consistent, high efficiency and good...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:35:18
Applicable: foley catheter, endotracheal tube and anesthesia mask etc. Size:7.3mm(287 inch)OD Material: PVC/silicone/ABS / 316 stainless steel Product description: standard 6:100 ruler taper, according with GBT1962.1-2001,and FDA...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:28:16
The development and manufacturing of Anesthesia mask product line ,the production line is adopted the international advanced and latest production technology, with high safety . The products are soft and comfortable, and the...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:23:20
Details: This machine is used for medical tubes punching eyes, such as feeding tubes, suction tubes, stomach tubes and foley catheters etc Can punch 1000pcs tubes per hour Power distribution:220V,2.0KW,copper core Compressed air:...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:16:09
This machine is produce balloons for endotracheal tube The mini 0.5L is one of the best selling machines It's economical, very fast, compact and easy to handle The standard equipment includes a scrap conveyor and a lateral exit for...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:09:56
Equipment configuration: The machine is used the most advanced forming technology from USA, the heating forming technology is very stable. Mitsubishi PLC control system makes the machine more stable. Cooperate with the accessories of...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 16:03:20
Equipment configuration: The machine is used the most advanced forming technology from USA, the heating forming technology is very stable. Mitsubishi PLC control system makes the machine more stable. Cooperate with the accessories of...
Post by Jim Yeung [Beauty & Personal Care] @2013-05-31 15:58:48
Adopting the latest world technology and optimized design to the machine units make the production line has the advantages of even plasticization, small shear ratio, high output and long service, etc. The production line consists of...
Post by Wells Wang [Security & Protection] @2013-05-31 10:22:35
Adopting the latest world technology and optimized design to the machine units make the production line has the advantages of even plasticization, small shear ratio, high output and long service, etc. The production line consists of...
Post by Wells Wang [Security & Protection] @2013-05-31 10:19:00
It is a complete production line adopting calendering compound process to put the plastic material such as LDPE, PP, PVC, EVA into extruder and then to calendering machine, cooling system and winding. The line is applied to produce...
Post by Wells Wang [Security & Protection] @2013-05-31 10:16:04
PVC single-layer and multi-layer plastic flooring is widely used in the cars, trains, airports, hotels and other public places as well as house decoration. PVC, PP, PE water-proof coiled sheet is widely used to such fields as tunnel...
Post by Wells Wang [Security & Protection] @2013-05-31 10:12:37
SHR series mixers are mainly used in mixing PVC and all kind of plastic materials mixing, coloring, drying and etc, in plastics, rubber, food-stuff, daily chemical industry and so on.
Post by Wells Wang [Security & Protection] @2013-05-31 10:09:32
It is equipped with special designed extruder used for polyolefin, has higher extrusion speed, higher plasticization. Special designed calibrating cooling mode: product sizes: 50-200mm, excellent design of the low temperature meting makes...
Post by Wells Wang [Security & Protection] @2013-05-31 10:06:32
