Low breaking strength for removal by hand Designed mainly for fire extinguishers & emergency equipment Serially numbered & can be personalised with company name ...
Aluvin Securiseal [Mechanical Parts & Fabrication Services] [Seals]
Style:Hydraulic for rods and pistons ...
Teng Seng Industries Pte Ltd [Mechanical Parts & Fabrication Services] [Seals]
Place of Origin:Taiwan Style:Mechanical Seal OIL SEAL, O-RING, BONDED SEAL, VALVE STEM SEAL, V-SEAL, C.V.BOOT, BELT,O-RING, RUBBER, PU SEAL, GASKETS, WIPER SEAL, SHAFT SEAL ...
WORLD-CHAIN SEALING CO.,LTD [Mechanical Parts & Fabrication Services] [Seals]
A compression packing made out of 100 % pure PTFE (POLYTETRA FLUROETHYLENE) and well constructed for valves, pumps, mixers, agitators involving application for corrosive chemicals, solvents, oils, oxygen services etc. Suitable upto temperature 270 degree c and medium pressure ...
sigmanonasbestos [Mechanical Parts & Fabrication Services] [Seals]
Style:Oil Product Description Product Name: Oil seals Model: n/a ...
ULTRASILANE RUBBER IND. CO., LTD. [Mechanical Parts & Fabrication Services] [Seals]
Model Number:Type 1 Brand Name:Erving Place of Origin:Taiwan Style:Mechanical Seal Standard or Nonstandard:Standard Usage: Centrifugal pump, revolution pump, transparency pump, mixer and speed retractor. ...
Erving Seal Enterprises Co., Ltd. [Mechanical Parts & Fabrication Services] [Seals]
: 3200 rpm ( Max ) Speed : (-) 50C to (+) 350C Temperature : 15 Bars ( Max ) Pressure : 19 mm to 100 mm Shaft Diameter Operating Limits : : SS-316 Metal Parts : Viton / PTFE / GFT Secondary Seals : Carbon / Sic. / TC Vs Sic. / TC Seal Faces Materials : This type WELDED ENDS ...
Unicon Engineering [Mechanical Parts & Fabrication Services] [Seals]
Style:Oil VARIED SPECIFICATIONS OF WIPER SEALS, OIL SEAL,HYDRAULIC SEALS,PISTON SEALS,BEARING SEALS,VALVE STEM SEALS & MECHANICAL SEAL ...
FANCO INTERNATIONAL [Mechanical Parts & Fabrication Services] [Seals]
Specifications of ptfe tape( teflon tape): 1) Density: 0.15 - 2.0g/cm3 2) Width: 3 - 100mm 3) Length: 5 - 50m 4) Thickness: 0.075 - 0.2mm 5) Color: White or colorful 6) Heat-resistance: +260oC 7) Cold-resistance: -190oC 8) High pressure resistance: 150 - 200kg/cm 9) Tensile ...
A to Z international industry limited [Mechanical Parts & Fabrication Services] [Seals]
ThredSeals are safe and reliable seals for threaded devices. They are self-centering and non-directional, designed to seal directly against threads, without any special requirements.ThredSeals can also offer considerable savings because they enable the use of low cost standard ...
DARCOID NOR-CAL SEAL [Mechanical Parts & Fabrication Services] [Seals]
Model Number:20/902901 Brand Name:Polyseal Place of Origin:West Midlands United Kingdom Style:Hydraulic Part Number 20/902901 Replacement Hydraulic Pump Seal Kit ...
Claron Hydraulic Seals Ltd [Mechanical Parts & Fabrication Services] [Seals]
Cable seal blue engraved "Unisto". 12.5mm diameter 200mm length. ...
Unisto Ltd [Mechanical Parts & Fabrication Services] [Seals]
Metric (mm) Stationary Ring : 18~150mm (metric)0.75~7(inch) Speed: Up to 25m/s Pressure: Vacuum to 2.5 MPa Temperature: -40~260. Operating Limits l Located by Set Screw: Easy fitting and installation l Fixed O-ring: Excellent adherent and good compensation performance in ...
BCD INDUSTRY [Mechanical Parts & Fabrication Services] [Seals]
As a cure, CURE & SEAL 100 - 300 E creates a vapor seal that minimizes moisture loss from evaporation and allows concrete to develop maximum strength, density and surface hardness. Available In 10%, 15%, 20%, 25% And 30% Solids. Meets The Moisture Retention Requirements Of ASTM ...
Nox-Crete Products Group [Mechanical Parts & Fabrication Services] [Seals]
PLASTIC LOK-SEAL 1704 USES Game Seals Lock Seals APPLICATOR: None required. TAMPER RESISTANT SEAL Self locking. Numbers molded in high relief. 1704 - Band 3/8" wide and fixed length of 7 1/2" MATERIAL: Plastic. COLORS: Red, Blue, Green, Yellow, Orange, Maroon, Gray, Black. ...
National Band & Tag Company [Mechanical Parts & Fabrication Services] [Seals]
Standard or Nonstandard:standards Model Number:SV 0211/S Brand Name:sil vex Place of Origin:Maharashtra India Material:s.s 304& 316 Style:mechanical seals These type of seals are multi spring with elastomeric 'o' ring. Designed for pharma industries ,chemical industries, etc. ...
sil-vex engineering [Mechanical Parts & Fabrication Services] [Seals]
Model Number:SV 050 Brand Name:selon seals Place of Origin:Maharashtra India Material:s.s.304/316 Style:mechanical seals Standard or Nonstandard:Standard These Type of Seals with single coil are designed to handle liquid of varying contaamination including sluries, sludges, ...
selon seals [Mechanical Parts & Fabrication Services] [Seals]
Loading type: Cylindrical packing. S01-P ...
Unikom-service [Mechanical Parts & Fabrication Services] [Seals]
Brand Name:rotamic Place of Origin:India rotary seals ...
Rotamic Hydraulics Pvt Ltd [Mechanical Parts & Fabrication Services] [Seals]
