Active Carbon Non woven Fabric Activated carbon non woven fabric has good adsorption, thin thickness and good air permeability. The Overview of Active Carbon Non woven Fabric Activated carbon non woven fabric has good adsorption, thin thickness and good air permeability. It can e
Fuyang Sensi Trading Co.,ltd [2023-09-06 14:39:10 ]
MstnLand, as one of professional cast iron gate valves suppliers and cast iron gate valves manufacturers, provides high performance gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemica
MSTN International Technologies Company [2023-09-06 14:23:50 ]
Mixing Silicone Rubber Usage it can be used for pressing buttons, o-ring, sealing gasket, shaft seal, rubber roller etc. Packaging and shipping the product adopts double corrugated carton packaging, net content 20 kg per piece. Please store in a cool, ventilated and dry place, aw
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:22:08 ]
Name Methyl Vinyl Silicone Rubber Feature High temperature resistant Appearance Colorless and transparent, no obvious mechanical impurities Application of Methyl Vinyl Silicone Rubber ZT-110 Methyl Vinyl Silicone Oil Rubber can be widely used in various fields of silicone compoun
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:21:28 ]
Product Name Hexamethylcyclotrisiloxane Molecular Formula [(CH3 ) 2 SiO]3 Molecular Weight 222.47 CAS No. 541-05-9 UN No. 1325 Physical and Chemical Properties Melting Point 64℃ Boiling Point 134℃ Relative Density (water=1) 1.12 Appearance White crystalline lens. Technical Da
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:20:11 ]
Name Fumed silica Appearance Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 T
Zhongtian East Fluorine Silicon Material Co., Ltd [2023-09-06 14:19:31 ]
CSA Binder Introduction Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material blend high in C4A3S (Calcium Sulfoaluminate Crystals). CSA Binder characteristics • Appearance light grey powder • Rapid strength
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:50:09 ]
Description of High Temperature Alumina Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:49:06 ]
What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite. H
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:48:05 ]
CSA expansive additive description The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:47:30 ]
CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast harde
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:46:54 ]
What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strengt
OREWORLD TRADE(TANGSHAN) CO., LTD. [2023-09-06 13:45:01 ]
E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks CDB Series and TDBY Series. 5 grades of grain size available 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing D
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:35:40 ]
E-Grind supplies the whole range of PCD blanks and PCD PCDN for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Bl
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:34:37 ]
E-Grind\'s metal bond micron products offer good Roughing, Lapping and finishing results. For resin bond, vitrified bond, and electroplated bond. Application of micron diamond powder for stone, watch, optical glass, etc. Types of Metal Bond Micron Diamond for Sale Micron Diamond
Henan E-Grind Abrasives Co., Ltd. [2023-09-06 11:34:11 ]
The diverter cartridge represents a shower valve system, while the shunt prevents water from escaping from the bathtub spout and sending it to the shower head. Some shower faucets use faucets that can also divert water. Types of Diverter Cartridge D22 22mm Diverter Cartridge D22-
NINGBO WANHAI CARTRIDGE TECHNOLOGY CO.,LTD [2023-09-06 10:57:36 ]
Minimum Opening Angle 180° Maximum Temperature 80°C Lever Break Torque ≥6N m Tightening Torque 5-7N m Specification of D25 25mm Diverter Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7.5 9.6 11.4 13.2 15 16.5 18.2 20 21.7 23.2 As one of the f
NINGBO WANHAI CARTRIDGE TECHNOLOGY CO.,LTD [2023-09-06 10:57:03 ]
Minimum Opening Angle 180° Maximum Temperature 80°C Lever Break Torque ≥6N m Tightening Torque 5-7N m Specification of D25-2 25mm Diverter-2Ways Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7.5 9.6 11.4 13.2 15 16.5 18.2 20 21.7 23.2 As one
NINGBO WANHAI CARTRIDGE TECHNOLOGY CO.,LTD [2023-09-06 10:56:27 ]
Minimum Opening Angle 360° Maximum Temperature 80°C Lever Break Torque ≥6N m Tightening Torque 5-7N m Specification of D24 24mm Diverter Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7.2 10.0 12.2 14.1 15.5 17.2 18.2 19.5 20.2 21.5 As one of
NINGBO WANHAI CARTRIDGE TECHNOLOGY CO.,LTD [2023-09-06 10:55:52 ]
Minimum Opening Angle 360° Maximum Temperature 80°C Lever Break Torque ≥6N m Tightening Torque 5-7N m Specification of D22-3 22mm Diverter-3Ways Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 7.6 10.2 12.1 13.9 15.6 16.6 18.0 19.2 20.4 21.2 As
NINGBO WANHAI CARTRIDGE TECHNOLOGY CO.,LTD [2023-09-06 10:55:18 ]
