Extruder single screw and barrel
Product Quick Detail
- Place Of Origin
- ZHOUSHAN, CHINA
- Packaging
- wooden case
- Delivery
- 20-30 Days
Specifications
Extruder single screw and barrel
Specification:
Diameter: Ø15-Ø500
L/D ratio:15-55
Base Materials:
1)38CrMoAlA(JIS SACM 645)
2)42CrMo(AISI 4140)
3)Cr12MoV(JIS SKD-11)
4)4Cr5MoSiV1(JIS SKD-61)
5)9Cr18MoV
6)DC53 (JIS G4404)
Bimetallic Alloy Materials:
1)Fe-based alloy
2)Ni-based alloy
3)Co-based alloy
4)NiCo-based alloy
5)Wolfram carbide
Bimetallic alloy level:
Alloy powder including 40% Wolfram Carbon
Alloy powder including 25% Wolfram Carbon
Alloy powder including 9.5% Wolfram Carbon
Processing Technology:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Technical Parameter:
Nitrided layer depth:0.50-0.80mm
Nitrided hardness: 950-1100HV
Nitrided brittleness: Less than 2 level
Surface roughness: Ra 0.4μm
Linearity of screw: 0.015mm/m
Hard-chrome plating hardness after nitriding: ≥950HV
Chrome-plating layer depth: 0.025~0.10mm
Bimetallic layer depth: 3-5 mm
We can manufacture all types of screws and barrels according to clients’ requirement.
you can try screw barrel to get through more products
- Country: China (Mainland)
- Business Type:
- Market:
- Founded Year:2003
- Address:Xiou industrial park,Jintang town,Dinghai district,Zhoushan,Zhejiang,China
- Contact:Linda Tang
Other products from Zhoushan Jinmao Machinery Manufacturing Factory
Relate products of Extruder single screw and barrel
直径范围：Ø15mm~Ø500mm 长径比：L /D=7~55 材质：38CrMoAIA（41CrAIMo7） 调质硬度： HB280-320 螺杆直线度： 0.015mm 氮化硬度： HV850-1000 氮化深度： 0.45~0.7mm 氮化脆性：2级 表面粗糙度：≤Ra0.4 ...
The extruder open screw barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of twin barrel screw can be square, ...
ScrewBarrel forExtruder There are two maintypes of screw barrel, 4D and 6D, with 4D being the most. According to the different selection of the materials from the customers, the corresponding bushing materials can be selected to meet the needs of the modified customer. ...
