Sbs/APP Bitumen Waterproof Membrane

Minimum Order
1
Packaging
N/A
Delivery
15 Days
Capacity(M²/year)(Reference) 2 million 3 million 5 million 8 million 10 million
Speed(M/min)(Reference) 0-12 0-18 0-25 0-30 0-35
Linear velocity 5-50M/min (adjustable)
Power source 220KW,380V,50HZ,3P
Labor Required(Reference) 5-7 6-9 9-11 9-11 9-11
Water Consumption 0.5T/day,recycling
Main Workshop
(L*W*H) /m
60x (12-15)x(6-8) 60x (12-15)x(6-8) 60x (12-15)x(6-8) 60x (12-15)x(6-8) 90x (12-15)x(6-8)
Automation degree Semi-automatic and Full-automatic
Fuel Coal, natural gas, diesel oil, etc
Length/Roll 10m or as customized
Width/Roll 1m-1.5m
Thickness/Roll 1.5 mm-5mm
Reinforcement Polyester, Fiberglass mat, Compound Mat
Surface material PE film, Aluminum foil,Sand, Schist flake,etc
Modified Materials SBS/APP
Reinforcement(Base material) Polyester felt:140-300g/M²,
Fiberglass felt:150-250 g/M²,
Composite reinforcement(5×5-8×8)
Diesel consumption 60Kg/h, Thermal efficiency≥73%, Oil burning boiler which is of 500,000K to heat conduction oil.
Compressed air 0.7Mpa,0.6m³/min
Air compressor motor 15KW

Modified bitumen waterproofing membrane is widely used in industrial and civil buildings, such as roof, basement, toilet, bridge, park, swimming pool, tunnel for waterproof and moisturepr of. Bitumen is a hydrocarbon and is created naturally from crude oil. It is a useful carbon store and does not generate greenhouse gases. The membrane is therefore a sustainable way of storing carbon on the Earth's surface.
Working principle
The whole working principle can be divided into 3 steps.
1.To mix the bitumen,rubber powder , talcum powder , enginee oil and some other raw materials via mixing tanks(the mixing tank should be kept warm by conduction oil).The finished mixtures can be called bituminous mixtures .
2.The bituminous mixtures will be delivered into coating pools.Then the base material(reinforcement ) will be coated with the bituminous mixtures.At last ,the coated reinforcement will be covered by PE film or sand or other materials.At that time ,the bitumen membrane preliminary forming.
3.The finished products will be cooled by water and air,then be rolled by auto winder.
  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Africa,Americas,Emerging Markets,Europe,European Union,Middle East,Oceania
  • Founded Year:2013
  • Address:Commerce Street, Dugu Village,Xinle
  • Contact:HouFeng xian
*Your name:
*Your Email:
*To:Xinle Hongtai Waterproof Machinery Factory
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

Waterproof Membrane Switch
Waterproof Membrane Switch

Waterproof Membrane Switch Common waterproof flexible membrane switches have good water resistance, and are also very good in related oil, dust, and moisture resistance, and can be used in a variety of environments. Flexible waterproof membrane switch: a waterproof insulating ...

Dongguan Niceone Electronics Technology Co,Limited

Outdoor Garments with Outdoor Waterproofing Membrane
Outdoor Garments with Outdoor Waterproofing Membrane

Outdoor Waterproofing Membrane Lightweight, windproof, durably waterproof and extremely breathable material: Rain simply beads up and runs right off the surface of the jacket to keep you dry, allowing you to perform at the highest level in all weather conditions. Our breathable ...

SUNGOD Technology Co., Ltd.

Waterproof Membrane Switch
Waterproof Membrane Switch

Waterproof Membrane Switch Common membrane switches have good water resistance, and are also very good in related oil, dust, and moisture resistance, and can be used in a variety of environments. Waterproof membrane switch: a waterproof insulating layer is coated on the surface ...

Dongguan Niceone Electronics Technology Co,Limited