CV7-V Ultrasonic Wind Speed Sensor
Product Quick Detail
- Minimum Order
- 1
- Brand Name
- LCJ
- Place Of Origin
- France
- Packaging
- N/A
- Delivery
- 15 Days
Specifications
CV7-V Ultrasonic Wind Speed Sensor
The CV7 is easily integrated into measurement and monitoring systems. The CV7-V is powered by 8-30 VDC power supply and it outputs RS232/RS422 (5V level signal) / NMEA0183.
CV7-V Ultrasonic Wind Speed Sensor Application
Static wind sensor
A conventional wind vane/anemometer features mechanical rotating parts. These moving parts expose the sensor to failure.
CV7 series was extensively tested in Marine applications for both precision and robustness.
Configurable wind sensor
CV7-V can be programmed and configured for : angle correction, smoothing time constant, units of measurement and interface format.
CV7-V connexion
CV7-V can be used connected to a PC and any systems featuring an NMEA® input port and specific pieces of equipment using conventional formats.
In PC mode, this bidirectional sensor can be set up for angle correction, damping, measure units and interface format.
Quality
All LCJ Capteurs are designed and manufactured in the Nantes region in France where they are fully tested throughout the manufacturing process.
CV7-V Ultrasonic Wind Speed Sensor Specification:
| Output data format | NMEA0183; MWV, XDR |
| Information transmited | Instant. W. Speed, Instant. W. Angle, avaibility |
| Output rate | 2 Hz / 30 Hz measurement |
| Wind module sensitivity | 0.12 m/s |
| Wind module resolution | 0.05 m/s |
| Wind module dynamic | 0.12 to 40 m/s |
| Direction sensitivity | +/-1.5° |
| Direction resolution | 1° |
| Power supply | 8 V to 30 V DC |
| Electrical consumption | 9 mA |
| Op. temp. without icing | -15° C to +55° C |
| Cable | 25 m / 4x0.22 mm2 |
| Connection | 4 wires |
| Weight of the head | 100 gr |
| Weight of unit assembly | 200 gr with mounting part |
| Mounting | Vertical ; 300 aluminium arm, Ø 16 mm |
Options
These industrial option are "Din" boxes with:
• 1x connection for 24VDC/AC power supply
• 1x connection for CV7-V data
• 1x 12 V connection for CV7-V power supply
• Galvanic isolation between power supply and analog outputs
• Galvanic isolation between power supply and sensor's power supply
• The sensor input is optocoupled.
420 AC
This option features :
• 1 4-20 mA output loop current for wind speed ranging from 0.25 Kts to 80 Kts and CV7 measurement check.
• 1 4-20 mA output loop current for wind direction ranging from 0 to 359° and CV7 measurement check.
• 2 Dry contacts for wind speed alarm
ANA-AC
This option features 3 outputs 0-10V:
• 0-15m/s
• 0-30m/s or 0-40m/s selectable
• 0-359° wind direction.
- Country: Hong Kong
- Business Type:
- Market:Europe
- Founded Year:2014
- Address:
- Contact:Rita yu
Other products from ISweek company
Relate products of CV7-V Ultrasonic Wind Speed Sensor
CV7-E Ultrasonic Wind Speed Sensor Description The CV7-E is easily integrated into measurement and monitoring systems. Detects gusts with great responsiveness and low latency. The CV7-E is powered by 8-30 VDC power supply and it outputs RS232 / RS422 / 5 V level signal / ...
SONIC-ANEMO-MICRO Ultrasonic Wind Speed Sensor Description: As a result of its very special electronic architecture the SONIC-ANEMO-MICRO shows a very low electrical consumption. It is ideal for remote stations or mobile installation. SONIC-ANEMO-MICRO is an OEM sensor designed ...
CV7-OEM Ultrasonic Wind Speed Sensor Description CV7-OEM shows the same features as the CV7 standard: light, compact and low energy consumption. With this OEM version of the Static Wind Transducer CV7, you can add an accurate Ultrasonic Wind Sensor to your own products and ...
