Taber abrasion resistance tester
Range of application
TABER abrasion resistance tester and wear resistance tester can be replaced by wheel and weight,
which apply to the abrasion resistance performance test on fabric, cardboard, paint, leather, tile, glass and natural rubber,
method is simple and easy to operate,which has been widely used in various industry's testing laboratory.
Abrasion tests, the material is standard wheel friction after a certain number of turns,
evaluate its abrasion resistance material weightlessness rate by calculation.
Abrasion wheel after pre grinding standard method, test results can reach very high consistency.
Core advantages
Simple operation, display real-time speed, the speed control can be achieved 30-75rpm adjustment,
wearing can be preset number of turns. Arm can match with balance weights, accurate weight balance abrasion arm,
to realize the ASTM standard which requires 125 g pressure requirements
Vacuuming mouth height is adjustable, and adapt to different thickness materials, efficient removal of debris, improve test accuracy
Brand motor, mute, low noise, smooth operation
Applicable Standards
ISO 9352, ISO 5470, ISO 7784, ASTM D1044, ASTM D3884, ASTM D4060, GB/T 5137.1, QB/T 2726, DIN 53109
Specifications
spinning speed | adjustable within the range of 30-75r/min (digital) |
The sample surface diameter | 100mm |
Sample table diameter | 113mm |
setting range of Number of turns | 1-999999 |
Air pressure | 250g |
Weight (based on purchase) | Counterweight、250g、500g、750g、1000g |
Wheel pressure range | 125g、250g、500g、750g、1000g、1250g |
Vacuum arm height | Adjustable |
power | 220V,50Hz |
Size | 220mm×380mm×300mm |
weight | 20kg |
Basic configuration | |
G270 | Taber Abrasion Resistance Tester |
|
(250g、500g、1000g) Weight × 1 set (250g, 500g, 1000g each one pairs) |
Optional Accessories | NA |
27001 | 1 pair of 125g Balance weights and fixed screw |
27002-1 | 1 pair of Import original abrasion wheel CS-10×1 |
27002-2 | 1 pair of Import original abrasion wheel H-18×1 |
27003 | Import the original decoration sandpaper (grinding disc) S - 11 x 1 package (100 pieces/package) |
27004 | Import original sample sticker S - 36 (50 / package) |
27005 | Diamond wheel polisher (friction wheel polishing Taber) |
XC001 |
One set of the vacuum cleaner |
PH(J) Series Slurry Pump Application: PH(J) series of slurry pumps are cantilever centrifugal slurry pumps, which are suitable for transporting particles with small particle size (diameter less than 1mm), no sharp corners and high-concentration slurry. They can also transport ...
PH(J) Series Slurry Pump Application: PH(J) series of slurry pumps are cantilever centrifugal slurry pumps, which are suitable for transporting particles with small particle size (diameter less than 1mm), no sharp corners and high-concentration slurry. They can also transport ...
Brief Introduction: The TABER Multi-Finger ScratchTester - Model 710 is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage not classified as ordinary wear. Based ...