Description
The hydraulic elevator mainly uses the hydraulic pump to drive the cylinder making the antenna up and down through the chain. The antenna is raised at working mode and will be transported into the cabin at sleeping mode.
The hydraulic lift has dual functions of manual and electric .
The characteristics are as follows
1. Working stroke: 850X2=1700mm
2. Diameter of piston rod: φ40
3. Cylinder characteristics: plunger rod
4. Working system pressure:6---10MPa
5. Pump station design
6. Power: 220V
7. Working temperature: -40℃ to +65℃
8. Storage temperature: -55℃ to +70℃
9. System pressure: P less than 15Mpa working pressure: P =6-10Mpa
10. Flow requirement: no more than 5 liters per minutes
11. Speed regulation requirements: working speed can be adjusted according to the needs
12. Using superposition valve or insert valve to integrate them.
13. Size requirements: can be determined according to the specific requirements of customers.
An hydraulic buffer elevator is a safety device installed in elevator systems that absorbs hydraulic pressure surges that may be caused by sudden stopping or starting of the elevator car during operation. It is typically installed in the elevator pit, beneath the elevator car, ...
Hydraulic elevation valve 4120002126 suitable for LGMG OFF-HIGHWAY DUMP TRUCK MT86,MT95,CMT96,MT60 DESCRIPTION Hydraulic elevation valve BRAND LGMG TYPE GENUINE SUITABLE FOR LGMG OFF-HIGHWAY DUMP TRUCK MT86,MT95,CMT96,MT60 OE REFERENCE NUMBER 4120002126 MOQ 1 PCE ...
Hydraulic Gauges for Sale hydraulic pressure meter are mainly used to measure the pressure of liquid medium in hydraulic systems. The tube expansion causes traveling of the tube end. After the transfer and the amplificaton by the movements and rods, the pointer will indicate ...