Rapid Prototype/SL300

Material Class: Photo reactive resin

LASER SYSTEM

Type: Diode-pumped solid-state laser Nd:YVO4

Wavelength: 354.7nm

Power at vat at 5000 hours: 300mW

Power auto-adjustment: Optional

RECOATING SYSTEM

Process: Intelligent reduced vacuum press recoater

Normal build style: 0.1mm

Quick build style: 0.125mm

Precision build style: 0.075mm

OPTICAL & SCANNING

Beam (diameter@1/e2): 0.10-0.15mm

Focus style: ScanLab

Part drawing speed: Recommended 6.0m/s

Beam jump speed: Recommended 10.0m/s

Reference Build Weight: 60 ~ 100g/hr

ELEVATOR

Vertical resolution: 0.0005mm

Position repeatability: ±0.01mm

Maximum part weight: 50kg

RESIN VAT

Volume: Approx. 45.0L (50kg)

Maximum build box: 300mm(X)×300mm(Y)×200mm(Z)

Resin heated style: Hot air

SOFTWARE

Operating system: Windows 7, Ethernet, IEEE802.3

Preparation software: Materialise Magics RP (optional)

Build software: ZERO 4.0 build software

CAD interface: 3D design software, STL file format

INSTALLATION CONDITION

Power: 200-240VAC 50/60Hz, single phase, 12Amps

Ambient temperature: 20-26ºC

Built-in air condition: Optional

Relative humidity: Less than 40%, non-condensing

Size: 1.2m(W)×0.9m(D)×1.75m(H)

Weight: Approx.530kg