Waste plastic bottles crusher

Commissioning

1. Close the magnetic starter handle to send power;

2. Press the button to open two or three times;

3, start, idling 1 ~ 2 weeks;

4. The combined operation of the transfer machine and theplastic crusher

5, check no abnormalities, send a start signal.

6. The running machinery and motor should be vibration-free, the sound and humidity should be normal, the temperature of each bearing should not exceed 75 °C, and the motor temperature should not exceed the manufacturer’s specifications.

7. The chain tension of the transfer machine must be the same. Under full load, the chain tension should not exceed the length of the two links, and there must be no chain or jump chain.

8. After the fusible plug or the fragile piece of the transfer unit joint transfer joint is damaged, it shall not be replaced by wood or other materials.

9. The safety net safety device of theplastic crusher

10. The safety devices such as the tail protection of the transfer machine must be guaranteed to be in good condition.

11. Transfer the carrier.

(1) Clean the tail of the machine, the sides of the fuselage and the floating coal and floating raft under the bridge;

(2) Protect cables, water pipes, oil pipes, and hang them neatly;

(3) Check the roadway support and shift the transfer machine while ensuring safety;

(4) The walking trolley and the tail conveyor of the belt conveyor should have good contact, do not run off, and the lap joint is good after the transfer, preventing the large plastic from smashing the tape to ensure the smooth flow of coal;

(5) After shifting the carrier, the nose and tail should be kept flat, straight, stable, and the jack live rod should be recovered.

https://www.recycle-plant.com/waste-plastic-pet-bottles-crusher.html