I.Product introduction:
1) DSHD-2806F Asphalt Softening Point Tester is designed and
developed as per the National Standard of People’s Republic
of China GB/T4507 “Test Methods for Softening Point of
Petroleum Asphalt”, and T0608 “Asphalt Softening Point Test
(Ring and Ball Methods)” in the Industry Standard of People’s
Republic of China JTJ052 Specification and Test Methods of
Bitumen and Bituminous Mixture for Highway Engineering.
2) DSHD-2806F Asphalt Softening Point Tester is applied to
determine softening point of petroleum asphalt, coal pitch,
liquid petroleum asphalt, and various asphalts.The instrument
is good for asphalt manufacturing companies, highway and
bridge construction companies, relative college and universities,
and scientific research institutes.
3) DHSD-2806F Asphalt Softening Point Tester adopts microcomputer
controlling, linear heating and automatic stirring mode, it can make
tests for two samples at the same time. The instrument can automatically
show measurement results after test,and is convenient, efficient,
and reliable. It is the best instrument used to determine softening
point of petroleum asphalt in the asphalt inspection laboratory.
II. Main technical specifications and parameters
1. Power supply: AC 220V±10%, 50 Hz
2. Environment: The room temperature should be less than 35 ℃
and keep stable without air convection.
3. Measurement range: 32℃~150 ℃; ±1.0 ℃
4. Stirrer: The stirring speed can be continuously adjusted.
5. Heating power: 800 W
6. Heating medium: glycerin
7. Beaker cubage: 1000 ml
8. Relative humidity: ≤85%
9. Total power consumption: ≤ 850 W
III.More softening point tester:
DSHD-2806E Asphalt Softening Point Tester
DSHD-2806F Asphalt Softening Point Tester
DSHD-2806G Automatic Asphalt Softening Point Tester
DSHD-2806H Automatic Asphalt Softening Point Tester
DSHD-2806I Fully-automatic Asphalt Softening Point Tester
DSHD-2806J Fully-automatic Asphalt Softening Point Tester
DSHD-2806 Asphalt Softening Point Tester
Purpose: 1)DSHD-0613 Asphalt Breaking Point Tester is designed and developed as per T0613“Asphalt Breaking Point Test (Fraass Methods)”in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. 2)DSHD-0613 ...
Productintroduction: 1)DSHD-0633 Liquid Petroleum Asphalt Flash Point Tester is designed anddeveloped as per T0633\"Liquid Petroleum Asphalt Flash Point Test (Tag Open Cup Methods)\" in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous ...
Specifications Determining softening point of bitumen and coal tar bitumen A: Standards: GB/T4507, ASTM D36, IP58 B: Application: Determining softening point of bitumen and coal tar bitumen C: Technical Features : 1. Steel ball : 9.53mm, 3.5±0.05g 2. Bracket: 2 holes 3. ...