RTV Liquid Silicone Rubber for Concrete Molds
Product Quick Detail
- Tear-Strength (Kgf /Cm2)
- 25 ± 5
- Operating Time ( Mins 25°C)
- 20-40mins
- Place Of Origin
- Guangdong
- Mixing Ratio
- 1：1
- Appearence
- translucent
- Hardness（Shore A）
- 35±2
- Packaging
- 25kg/drum and 200kg/drum
- Delivery
- 15 Days
Specifications
Applications of RTV-2 liquid silicone rubber for concrete molds:
E642# addition molding silicone could be mainly used for making concrete stones, precision molds, PU molds, resin molds, gypsum casting, candle molding, for life casting, fabric finishing, seal for electronic components and solar circuit board, trademark decoration. etc.
Features of rtv liquid silicone rubber for concrete mold
Two-parts, flowable liquid silicon & curing agent.
Can solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
Good tensile strength and tear strength,low shrinkage.
It gets cured at room temperature 25 0C within 5-7 hours.
An exceptional fluidity and good operability, easy to be demolded.
Suitable for pouring methods of operation for small sized molds making.
Desprition of rtv liquid silicone rubber for concrete molds
E642# addition molding silicone is generally named two-components silicone rubber, Part A and part B. It features an exceptional fluidity and good operability. The mixing ratio is 1:1,mainly be suitable for making molds application.
Q642 addition cure silicone rubber is mainly used for molds making for food grade products. And it is also develop to solve the problem of not lighting of the candles and the problem of sticky and white stains on the surface of cement & stone products.
OPERRATING INSTRUCTION of rtv liquid silicone rubber for concrete molds for garden:
1.Stir part A and part B with right mixing ratio
evenly. And get the mixture for vacuum-
pumping. (If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2. Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4. Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished addition cured silicone mold .
PACKAGE of liquid silicone rubber for large concrete casting:
Packed in clean 5kg/pail, 25kg/pail, 200kg/pail.
For more information , pls feel free to contact Mr Samuel
Office No :0086-755-89948006
Mob:86-18938867572
Mail:hyjcjm(at)szrl(dot)net
- Country: China (Mainland)
- Business Type:
- Market:Europe,Middle East,Asia,Africa,Emerging Markets,Oceania
- Founded Year:1998
- Address:Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong,
- Contact:Samue Chen
Other products from HONG YE JIE SILICONE CHEMICAL PLANT
Relate products of RTV Liquid Silicone Rubber for Concrete Molds
Model Color Mixing ratio Pot life (mins) Demouled time (hrs) Hardness(A0) Tensile-strength (kgf/cm2) Tear-strength (kgf/cm) Viscosity (cps) Elongation (%) HY-E625 translucent 1 : 1 30-60 4±1 25±2 35±2 25±2 6000±3000 ≥400 HY-E630 translucent 1 : 1 30-60 4±1 30±2 40±2 ...
Features ofrtv liquid moulding silicone rubber RTV liquid moulding silicone rubber has the following features a. low viscosity, exceptional fluidity and easy operation : 21000 cps suitable for pouring b. resistance to deformation, high-temperature 220 degree centigrade c. acid, ...
HY-605 is a kind of room temperature vulcanized silicone rubber incondensationtype.It’sgenerally named astwopart silicone rubber ,Part A is a flowable liquid, part B is the curing agentor catalyst . It’s mainly used for mold making . HY-605 silicone rubberisusedformaking ...
