Pad Printing Silicon Rubber

Pad Printing Silicon Rubber Usages:

Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .

Pad Printing Silicon Rubber description

Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

.

Pad Printing Silicon Rubber Features:

High print times

abrasion resistance.

Good printing effects

Permanent and durable

Pad Printing Silicon Rubber Operation Instructions:
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3-5minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed mixture into the original mold slowly,

Shelf life for silicon rubber for mold making

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making

20kgs/drum vacuumed packing

For further information, pls contact with Miss ellar

TEL: 0086-755-89212365

Mobile: 0086-18938867558

Mail : hyxs(at)szrl(dot)net

Welcome to visit www (dot)szrl (dot)net anytime

https://www.facebook.com/mouldsilicone youtube:http://www.youtube.com/channel/UCed_-QO7UZneNYsWTxR1KFA

linkedin:http://www.linkedin.com/profile/view?id=189510785&trk=nav_responsive_tab_profile_pic

twitter:https://twitter.com/Saminaray