OPS-30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is
a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probe can be used for workpiece measuring. Optical transmission probe is widely applied. OPS-30 optical transmission probe
system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on.
OPS-30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is
a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probe can be used for workpiece measuring. Optical transmission probe is widely applied. OPS-30 optical transmission probe
system mainly used in various specifications of machine center, CNC milling machine, drilling machine center and so on.
Parameter of OPS-30 Optical CNC Infrared Probe System
OP510:
Measuring direction ±X,±Y,+Z
Arbitrary direction swinging angle X-Y±12°, Z +5 mm
Repeatability (2σ) ≤ 2 μm;
Trigger force in Z direction 600±30(g)
Trigger force in X-Y direction 40-80g)
Optical signal receiving/sending distance >5m
Model of the standard stylus M4-P50-RB6-S36
Model of the battery 14250,3.6 (V), 2 Pcs
Seal grade IP68
OSI-20:
Optical signal receiving/sending distance >5m
Input voltage 24±10% VDC
Output load current 50mA
Length of the cable 8m
Length of the cable retaining tube 2m
Seal grade IP68
Optical Probing Application of OPS-30 Optical CNC Infrared Probe System
Optical probes are suitable for small and medium-sized milling machines and machining centers with automatic tool change.
Optical probe are used to set work-piece coordinate system and machining zero points
Optical probe are used to detect and control the key dimensions, position coordinates and their precision automatically between two processes
Technology of OPS-30 Optical Transmission Probe System
Probe switch on/off method::Range on/off、M code on/off;
Infrared coded signals are used to transmit information between the probe and the receiver;
The transmitting distance of the probe signal can be adjusted by trigger probe with special program to set the receiver;
Output four kinds of SSR signals to machine control system when probe is in the states of trigger、error、probe batteries low and output pulse;
The OSI-20 receiver can change its logical state of the output signal by setting;
Double infrared signal receiving and transmitting devices are used to increase the reliability of the equipment;
The LED lights in the receiver show the working status of the probe system.
Pioneer is a professional probe manufacturer, we provide pioneer machine and tool, usb optical probe, cnc zero probe, cnc zero probe, homemade cnc 3d touch probe, machine probe and etc. Want to
know more? Please contact us.