Hydraulic Liner Hanger Tie-Back Assembly
Product Quick Detail
- Place Of Origin
- Jinan City, Shandong Province. P.R. China
- Minimum Order
- 1
- Packaging
- wooden box or loose
- Delivery
- 45days
Specifications
The tie-back assembly is a special cementing tool for tieback operation.
Tieback equipment allows existing liners with a receptacle to be extended to the surface or farther up hole, and provides a high-pressure seal at the top of a cemented or uncemented liner. TIW
offers variety of tieback seal nipples and tieback packers to accommodate liner top extension and remedial operations. Today, some new types of drilling liner tieback equipment are developed due to
the annular gas channeling in high-pressure oil-gas well even after tie back cementing.
Tie back liner procedure of Hydraulic Liner Hanger Tie-Back Assembly
A. Preparation before casing
Measure and drift the casings carefully and clean all the threads.
Calculate the kelly-up of the casing (the particular part of the last casing which is above the rotary table) and arrange the casing string.
Prepare several casings, which are approximately 0.5m shorter than the others and convenient for kelly-up calibration. (The actual kelly-up is not equal to the calculated value due to measurement
error and the remaining threads of the casings.)
B. Polishing the polished bore receptacle
Connect the milling shoe and trip in. Polish the inner surface of the polished bore receptacle, make sure there is no debris.
Note the depth of the milling shoe when it reaches the top of the seal assembly (judge from the changes on pressure and WOB). Then lift the drill string for 1m.
Use a drilling rate of 40～50rpm and a normal flow rate. Slowly lower the drill string. Polish the inner surface of the polished bore receptacle twice or three times. Each time polish 3～4min. During
the last polishing, apply an additional load of 2～3t when the torque suddenly increases (the milling shoe reaches the top of the seal assembly) during the last polishing. Polish for another 2~3min
and note the depth of the milling shoe, which is an important clue for the casing setting depth.
Circulate with high flow rate for 5min.
Trip out and check the milling shoe. If there is a circle of polished trace and the diameter is equal to the I.D. of the left thread on the seal assembly, then the milling shoe have reached the
bottom of the polished bore receptacle.
Features of Hydraulic Liner Hanger Tie-Back Assembly
With the guide shoe and circulate bore, it can stab into polished bore receptacle before cementing, more convenient than conventional cementing which pumps down cement before stabbing.
With its streamline shape, the guide shoe can stab into polished bore receptacle easily.
The Tieback Seal Assembly with three stacks of molyglass seal is designed for high-pressure and high-temperature liner tieback completions. Available in seal length is 1.2m.
As one of the top reliable liner hanger companies in China, Saigao has been devoted in the production of hydraulic liner hanger products. Drop us messages for any query to know more about Saigao
and Saigao products.
Technical Parameters of Hydraulic Liner Hanger Tie-Back Assembly
Specifications, mm Φ177.8 Φ127.0
Sealing capacity, MPa 25 25
Heat-proof Rating, ℃ 120 120
Available Sealing Length, mm 1200 1200
I.D., mm Φ155 Φ108
,
As one of the most professional oil well equipment manufacturers, Saigao Group provides oilfield cementing tools, tie back receptacle, tie back casing, liner hanger assembly, hydraulic hangercasing
tie back, tie back liner and etc. Saigao products are not only popular in China, but also exported to Russia, Brazil, Australia, South Africa and other countries and regions.
- Country: China (Mainland)
- Business Type:
- Market:
- Founded Year:2008
- Address:Zhongrun Century Center, No 12111,Jingshi Road, Lixia District, Jinan City, Shandong Province. P.R. China
- Contact:Rex Liu
Other products from Shandong Saigao Group Corporation
Relate products of Hydraulic Liner Hanger Tie-Back Assembly
Hydraulic Liner Hanger Sealling Assembly
The casing spool assembly comprises shell and pack off bushing and is used to seal the annular clearance between polished nipple and liner hanger body so as to build pressure after the ball reaches the landing collar, preventing current from passing through upward. There are ...
Hydraulic Liner Hanger Polished Bore Receptacle
polished bore receptacle liner hanger Mated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The polished bore receptacle (PRB) is a highly machined component with a polished bore. Frequently, a liner system mainly consists of ...
