RPS-20M Radio Probe System

RPS-20M radio probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated part set-up and in-cycle gauging on machining centers, including 5-axis machines. RPS-20M radio probe system used in various specifications of machine centers, large-scale gantry machine, five-axis CNC machine tools and so on.

RPS-20M diy cnc probe system contains RP610M touch probe, RSI-20M receiver and standard measuring software. The RP610M is a compact spindle probe with radio signal transmission which offers automated part set-up and in-cycle gauging on machining centers, including 5-axis machines. RPS-20M radio probe system used in various specifications of machine centers, large-scale gantry machine, five-axis CNC machine tools and so on.

Parameter of RPS-20M Radio Probe System

RP610M：

Measuring direction ±X，±Y，+Z

Arbitrary direction swinging angle X-Y±15°, Z +5 mm

Repeatability （2σ） ≤ 2 μm；

Trigger force in Z direction 600±30（g）

Trigger force in X-Y direction 50-100（g）

Radio signal receiving/sending distance >14m

Model of the standard stylus M4-P50-RB6-S36

Model of the battery 14250，3.6 (V), 2 Pcs

Seal grade IP68

RSI-20M

Radio signal receiving/sending distance >14m

Frequency of the radio signal 2.4-2.483G

Quantity of the radio channel 16

Input voltage 24±10% VDC

Output load current 50mA

Length of the cable 8m

Length of the cable retaining tube 2m

Seal grade IP68

Application of RPS-20M Radio Probe System

RPS-20M has a transmission distance of up to 14 m, which is suitable for five-axis machining centers and large machine tools equipped with complex fixture components.

The cnc touch probe wireless transmits signals by radio and can be applied to the measurement of deep cavity workpieces.

wireless touch probe are often used on double-head lathes to process large parts such as automobile axles

Technical Characteristics of RPS-20M Radio Probe System

Probe switch on/off method:：Range on/off、M code on/off;

Radio code signals are used to transmit information between the probe and the receiver. The time to transmit and to decode a group of signals is less than 1ms;

The transmission frequency of the radio signal is within 2.4 G-2.483 G, the number of transmission channel is 16;

Output four kinds of SSR signals to machine control system when probe is in the states of trigger、error、probe batteries low and output pulse;

The RSI-20 receiver can change its logical state of the output signal by setting;

The LED lights in the receiver show the working status of the wireless probe cnc system.

As a professional probe factory, Pioneer has high-quality cnc machine tool probe for sale. Welcome to contact us if needed.