I. Introduction
GD-265 Petroleum Oil Kinematic Viscometer ASTMD 445 is designed and made as per the Industry Standard of People’s Republic of China SY/T5651 “
Technical Condition for Kinematic Viscosity of Petroleum Products”. It is suitable to determine the kinematic viscosity of liquid petroleum products (Newton liquids) under a constant temperature (low temperature) as per the National Standard of People’s Republic of China GB/T265 “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation Methods for the Dynamic Viscosity of Petroleum Products”
II. Main specifications and parameters
Model | GD-265 kinematic viscometer/ Petroleum Product Kinematic Viscometer |
Power supply | AC 220V±10%, 50 Hz |
Heater | heat by electric heater, 600 W |
Cooler | by double refrigeration compressors |
Stirring motor | 6 W, 1200 RPM |
Measurement range | room temperature~-70 °C |
Temperature controlling accuracy | ±0.1 °C |
Constant temperature bath | Made by stainless steel, 5.8 L |
Ambient temperature | ≤30 °C |
Relative humidity | ≤85% |
Temperature sensor | Industry platinum. Pt100 |
Illumination | 220 V electricity-saving lamp. |
Capillary viscometer | Total 7 pieces. The diameters of them are 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5 mm |
Total power consumption | not more than 1700 W |
Purpose The Kinematic Viscosity Tester is designed and made as per the National Standard GB/T265 “Test Methods for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity”, and the Industry Standard SY/T 5651 “Technical Condition for Petroleum ...
I.Brief Introduction This Kinematic viscometer is designed and made as per the industry standard of People's Republic of China SY/T5651 Technical Condition of Petroleum Products Kinematic Viscosity Tester. It is suitable to determine kinematic viscosity of liquid petroleum ...