GD-265D-1 Kinematic Viscosity Tester
Product Quick Detail
- Place Of Origin
- China
- Packaging
- Standard wooden case and carton according to customer's requirement
- Delivery
- 15 Working Days
Specifications
Introduction
The Kinematic viscometer is designed and made as per the National Standard GB/T265 “Test Methods
for Kinematic Viscosity of Petroleum Products and Calculation of Dynamic Viscosity”. It is suitable to determine kinematic viscosity of liquid petroleum products (Newton liquid) at a certain temperature. It is in accord with SY/T 5651 “Technical
Condition for Petroleum Products Kinematic Viscosity Tester”.
Technical parameters
1. Power supply: AC220±10%, 50 Hz;
2. Heating power:
(1) Auxiliary heating: 1000 W
(2) Temperature controlling: 650 W;
(3) Stirring motor: 6 W, 1200 RPM;
4. Temperature range: ambient temperature~100°C;
5. Temperature controlling accuracy: ±0.01°C;
6. Constant temperature water bath: 20 L, two layer
bath;
7. Ambient temperature: -10°C~+35°C;
8. Relative humidity: less than 85%;
9. Timing device: 0.1s ~999.9 s, resolution is o.1 s;
10. Capillary viscometer: 7
pieces in a group; Inner diameters of them are 0.6, 0.8, 1.0, 1.2, 1.5, 2.0, 2.5 mm respectively;
| No. | Name | Unit | Qty |
| 1 | GD-265D-1 petroleum product kinematic viscosity tester(including glass jars, stirring device and rubber bound) | set | 1 |
| 2 | Capillary viscometer(Total 7 pieces) | Group | 1 |
| 3 |
Mercury thermometer
0~50 °C; 50~100 °C; scale values are both 0.1 °C) |
pc | 1 for each |
| 4 | Plummet | pc | 1 |
| 5 | Sensor | pc | 1 |
| 6 | Sensor Connector | pc | 1 |
| 7 | Power Supply Wire (250 V 10 A) | pc | 1 |
| 8 | Cover | pc | 4 |
| 9 | Capillary Clamp | Group | 4 |
| 10 | Silica Gel Stopper | pc | 2 |
| 11 | Fuse 15 A (Φ5×20) | pc | 2 |
| 12 | Rounded Glass | pc | 1 |
| 13 | Stopping ring for Thermometer (1#) | pc | 4 |
- Country: China (Mainland)
- Business Type: Manufacturer
- Market:Asia
- Founded Year:2009
- Address:重庆南岸区南坪
- Contact:Sunny Liu
