GD-4508D Asphalt Ductility Tester/ Bitumen Ductility Tester

Place Of Origin
China
Packaging
Standard wooden case and carton
Delivery
15 Days
-4508D Asphalt Ductility Tester
The GD-4508D Asphalt Ductility Tester is designed and made as per the National Standard GB/T 4508 “Test Methods for Ductility of Petroleum Asphalt”, and T0605 “Asphalt Ductility Test” in the Industry Standard JTJ052 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. The Asphalt Ductility Tester is suitable to determine the length of petroleum asphalt when it is dragged to broken at certain speed under stipulated condition and temperature. It is indicated by cm.
Technical characteristics
1. The Asphalt Ductility Tester integrates achievements of domestic and overseas design concepts on ductility tester. It is advanced and delicate.
2. There is no thread rod, guide rail and other device in the test trough, so it is convenient to install test sample.
3. Equipped with newly designed driving parts, it is stable and synchronous without shake during dragging procedure. The dragging speed is uniform and the ductility is accurate.
4. The Asphalt Ductility Tester can make determination for 3 pieces of sample at the same time.
5. The Asphalt Ductility Tester adopts digital temperature controller, high precision sensor and magnetic circulation pump, so the bath can be adequately circulated and the controlling temperature is precise.
6. The test sample holder can return back automatically. It will take about 10 min to return back for 2.5 meter distance.
Technical parameters:
1. Power supply: AC 220 V (-5%~+10%), 50 Hz;
2. Measurement range: 2.0 m (±10mm);
3. Heating type: by an electric heater;
4. Heating power: 3200 W;
5. Bath circulation: by a magnetic circulation pump;
6. Temperature controlling range: 5~49°C; digitally displayed;
7. Temperature controlling accuracy: ±0.1°C;
8. Dragging speed: two grades, 10 mm/min and 50 mm/min;
9. Measurement accuracy: ±1 mm;
10. Ductility display: Controlled by microprocessor; digitally displayed after data processing;
11. Refrigeration type: by a compressor; input power is 1200 W.
12. Total power consumption: not more than 4500 W.
  • Country: China (Mainland)
  • Business Type: Manufacturer
  • Market:Asia
  • Founded Year:2009
  • Address:重庆南岸区南坪
  • Contact:Sunny Liu
*Your name:
*Your Email:
*To:重庆格纳迪设备有限公司
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters : 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

submiting now We do inquire for you , please wait ...

DSHD-4508J Asphalt Ductility Tester
DSHD-4508J Asphalt Ductility Tester

 ±0.5 N; 11. Data output: (1) It can communicate with a computer through RS232 port; (2) The data can be printed by a micro-printer; 12. Refrigeration type: by a refrigeration compressor; input power is 800 W; 13. Ambient temperature: -10~+35°C; 14. Relative humidity:no more ...

Dshing Instrument Co.,Ltd

DSHD-4508G Low Temperature Asphalt Ductility Tester
DSHD-4508G Low Temperature Asphalt Ductility Tester

Function:  1)DSHD-4508G Low Temperature Asphalt Ductility Tester is designed and developed as per the National Standard GB/T 4508\"Test Methods for Ductility of Petroleum Asphalt\", and T0605\"Asphalt Ductility Test\" in the Industry Standard JTJ052 Specification and Test ...

Dshing Instrument Co.,Ltd

DSHD-4508F Asphalt Ductility Tester
DSHD-4508F Asphalt Ductility Tester

I. Product introduction:  DSHD-4508F Asphalt Ductility Tester is designed anddeveloped based on the regulations of standards of GB/T4508、ASTMD113、T0605 bitumen ductility test, todeterminate bitumen length in regulated temperature and speed stressed and be broken, and to ...

Dshing Instrument Co.,Ltd