Summa S75

Site : wahanahash.com
Accept Paypal

Summa S75

Technical Specs & Details

Specifications	Summa S75
TYPE	75 cm (30 in.) tangential-knife, friction feed
SPEED	Up to 1000 mm/sec. (40 in./sec.) axial; Up to 1414 mm/sec. (56 in./sec) diagonal
CUTTING AREA	74.2 cm x 50 m (29.2 in. x 164 ft.) maximum
ACCELERATION	Up to 4 g axial; Up to 5.5 g diagonal
KNIFE PRESSURE	0-600 grams, in 5-gram increments
ADDRESSABLE RESOLUTION	0.025 mm, 0.1 mm selectable (Metric); 0.001 in., 0.005 in. selectable (English)
REPEATABILITY	Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40 ft.) long
TOOL COMPATIBILITY	Standard knife for vinyl, reflective and fluorescent films; Thick material knife for sandblast resist and other films up to 1.2 mm (0.047") thick; Double-tip knife for heavy-duty materials; Ballpoint pen for plotting on paper; Pounce tool for pouncing on paper
MEDIA WIDTHS	6 to 84 cm (2.4 to 33 in.)
MEDIA LENGTH	50 m (164 ft.) maximum
MEDIA THICKNESS	Up to 0.25 mm (0.01 in.) with standard knife; Up to 1.2 mm (0.047 in.) with thick material knife; Up to 0.25 mm (0.01 in.) reflective and other hard-to-cut materials with double-tip knife
MEMORY	16 MB
INTERFACE	USB 1.1 and Serial RS-232C
DISPLAY LANGUAGES	English; French; German; Dutch; Italian; Spanish; Polish
CUTTER LANGUAGES	Summa DM/PL, HP-GL or HP-GL2 (with selectable origin ; HP7475 and HP 7580/7585)
POWER REQUIREMENTS	100-240 Vac, 48-62 Hz, 85 VA maximum
OPERATING ENVIRONMENT	15° to 35° Celsius (59° to 95° Fahrenheit); 35 to 80% relative humidity (non-condensing)
DIMENSIONS (W x D x H)	141 x 68 x 111 cm (55.5 x 26.8 x 43.7 in.)
SHIPPING WEIGHT	69 kg (152 Lbs.)
ACCESSORIES INCLUDED	2 standard knife blades and standard nose peice 1 thick material knife and thick material nose piece Blade holder for standard, thick material and double-tip knife (requires matching nose piece) Ballpoint pen with pen holder Power cord Serial interface cable (PC) and USB Cable (PC/Mac) Quick start guide (English, French, German, Italian, Spanish and Dutch) User's manual and drivers on CD-ROM Summa Cutter Control™ software (for controlling cutter settings) WinPlot™ (PC) and MacSign Cut (Mac) cutting programs Cutting plug-in for CorelDRAW 10 thru X3 and Illustrator CS and CS2

Accessories

Standard Features & Accessories

• OPOS™ X contour-cutting alignment system
• Stand with adjustable front and rear media baskets
• Media supply rollers with media end flanges
• Media cutoff system
• Automatic interface selection
• Selectable origin
• Variable knife-tip offset (0-1 mm / 0-0.04")
• 8 user-definable configurations
• Autoload feature
• Adjustable pinch roller pressure
• Dual protection strips (cut and pounce)
• Overcut feature (for easier weeding)
• Flex-cut feature (for cutting completely through the media)
• OPTiCUT™ and TurboCut™ performance enhancement modes (when operating in drag-blade mode)
• Vector look-ahead
• Curve and arc smoothing
• Diagnostic routines

Summa S75

Warranty Information