Pad Printer

FEATURES- Change of ink and cliche in a few seconds- Robust construction and varnished with powder resistant paint- Machine is electro-pneumatic, command extremely easy to use- Pinned cliche, so no need for registration- Hermetic ink cup with patented push-on reversible ceramic ring, so doubles working life. - Built-in device to vary the inter-axis between the ink-cups (only in the traditional version) . - Can print on any level (even lower than the level of the cliche) - The machine can immediately restart work after long periods of inactivityTECHNICAL DATA- Production / HR.  (adj. ) : approx. 800 / 900 pc / HR. Dry run. - Cliche holding table: can be supplied with dim. From 250x650 to 250x850 mm. - Cliche plate: 5 variable (user defined) sizes of thin steel or photopolymer cliche plate up to a max. 250 x 850 mm. , with 2 punched location holes. - Printable area: is dependant on size and number of ink-cups employed. - Pad-holder: fixed magnetically to slide allows rapid set-up. - Working cycle: single, continuous, step by step or commanded by an external line, ink remixing. - Pad force: can be regulated by operator constantly, during working cycles. - Pad stroke: down travel up to max. 200 mm. - In / Out: with sensor for end of stroke and presence of substrate built into the machine. - Feed: compressed air 6 BAR- Main supply: 240 V.-50 Hz. - Piece-holding turret: adj. On axes x, y, z and r. For fine regulation. - Dimensions: 1000x1700x1900 mm. - Options: automatic scotch tape pad cleaning device.