Searching material , total 736696 products,queries done in 248 ms

Plano-Convex Lenses

Plano-Convex Lenses areused for focusing beams in telescopes, collimators or condenser systems, optical transceivers or other applications. Main specifications: Material: BK7 or other optical glass, fused silica, CaF2 and ZnSe Diameter tolerance:±0.2mm ~ ±0.05mm Focal length ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:36:47 ]

Fresnel lenses

Fresnel lenses can capture more oblique light from a light source, thus allowing the light from a lighthouse equipped with one to be visible over greater distances. Fresnel lenses were later produced, being used for automobile headlamps, brake, parking, and turn signal lenses, ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:30:45 ]

Beam splitters

Beam splitters: When a light beam is incident onto a surface inclined at an angle of incidence to the incoming beam, the reflected and transmitted light becomes partially polarised. This can be resolved into two components defined as s and p polarisation. This effect of an ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:24:47 ]

Senyuan Detachable Container Garbage Truck

1.SMQ5021ZXX use mature Changan STAR single chassis,luxurious interior,elegant appearance,reasonalbe and broad vision. 2.Air condition may as an optional part in the cab. 3.SMQ5021ZXX use famous brand high-quality petrol engine,powerful,low speed high torque,especially suit for ...

Henan Benma Co.,Ltd    [Transportation]   [Special Transportation]   [2014-01-03 03:22:09 ]

LED prisms

LED prisms: The following are parameters: 1.material: BK7,Fused Silica and other optical glass 2. Wavelength:632.8 3. Focal length tolerance:±1% 4. Diameter tolerance:+0.0/-0.1mm 5.Centre thickness tolerance:±0.1mm 6. Flatness:λ/8@633nm 7.Surface quality: 40/20 8. Optic ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:20:59 ]

Right angle Prisms

Right angle Prisms are available in both Laser Quality and Analytical Quality polish designated as LQ (Laser Quality) and AQ (Analytical Quality). Right Angle Prisms are a type of 45-90-45 degree prism typically used to bend a beam of light through a right angle with the ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:18:27 ]

Roof prisms

Roof prisms also called amici prisms or right angle roof prisms, do two things: invert the image and bend the line of sight through a 90° angle.They are excellent as prism diagonals in optical systems, because they erect the inverted image. Also ideal for use in spotting ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:16:32 ]

Penta Prisms

Penta Prisms is a five-sided prism. It reflects light rays through a 90° angle by two reflections and does invert or revert the image. The reflecting surfaces are aluminized. Slight movement of the prism does not affect the true right angle at which light rays are reflected. ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:12:57 ]

Dove prism

Dove prism is a type of reflective prism which is used to invert an image. A beam of light entering one of the sloped faces of the prism undergoes total internal reflection from the inside of the longest (bottom) face and emerges from the opposite sloped face. Images passing ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:09:38 ]

Equilateral prisms

Equilateral Prisms are used routinely as dispersing elements where spectral separation is required. They provide better brightness. They also have greater power handling capabilities and avoid possible confusion when trying to interpret overlapping spectral orders. Ealing ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:07:53 ]

Ball lenses

Ball lenses have an even higher index of refraction, providing a shorter back focal length, which simplifies fiber coupling.Other uses include endoscopy, bar code scanning, ball pre-forms for aspheric lenses, and sensor applications. Material BK7, UVFS, SF8, Sapphire and others ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 03:05:16 ]

Rod Lenses

Rod Lenses are generally used as light pipes. Its optical principle is similar to fiber optics where light can be transmitted from one end to the other with relatively small leakage. Rod Lenses can be used as Cylindrical Lenses. In certain application, Rod Lenses can also be ...

Jilin Tianhua Opto-electrical Technology Development Co., Ltd.    [Measurement & Analysis Instruments]   [Optical Instruments]   [2014-01-03 02:57:54 ]

Senyuan SMQ5070ZZZ Self loading and unloading garbage vehicle

1. SMQ5070ZZZ use Duolika underpan,good performance,realiable quality,it equipped with famous brand diesel engine,you may choose suitable engine to fit for your local area according to different area requirements. 2.Antirot material were painted in garbage can,which may prevent ...

Henan Benma Co.,Ltd    [Transportation]   [Special Transportation]   [2014-01-03 01:58:09 ]

Floral Pins - Green flower pins and Galvanized wire pins

Floral Pins fix materials to flower or foam for floral design Floral pins are U-shaped floral wire. They are widely used for floral design, such as fix silk and dried flowers, fix floral moss to foam, and attach materials to wreaths for decorations. Materials: green painted ...

Blumendraht Floral Wire Factory.    [Minerals & Metallurgy]   [Wire Mesh]   [2013-12-31 02:49:24 ]

Green floral wire, 6# - 30# green paddle floral wire, application

Green floral wire decorates Christmas trees and crafts Green floral wire we supply is widely used in making of culture items, arts and crafts. It is also used for decoration of Christmas trees and floral arrangements in the USA and European countries. Green paddle floral wire ...

Blumendraht Floral Wire Factory.    [Minerals & Metallurgy]   [Wire Mesh]   [2013-12-31 02:45:31 ]

Floral wire with bright colors used for floral arrangements

Floral wire, florist wire and floral stem wire Floral wire, also called florist wire, is an indispensable tool in creating floral arrangements and bouquets. It is ideal for such Bouquets, wreaths and garlands. Especially in the fall and Christmas season can conjure up beautiful ...

Blumendraht Floral Wire Factory.    [Minerals & Metallurgy]   [Wire Mesh]   [2013-12-31 02:44:48 ]

High productivity china cutting laser machine with big size HS-B1530

HSG Laser adhere to “manufacture the best laser cutting beds in China” for business purposes. The machines go through 600° C heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, to make sure 20 years normal usage without deformation, can cut acrylic, LED ...

Foshan Beyond Laser Technology Co.,Ltd    [General Industrial Equipment]   [Laser Equipment]   [2013-12-30 10:32:22 ]

150W big size wood laser cutting machine HS-B1525

HSG Laser adhere to “manufacture the best laser cutting beds in China” for business purposes. The machines go through 600° C heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, to make sure 20 years normal usage without deformation, can cut acrylic, LED ...

Foshan Beyond Laser Technology Co.,Ltd    [General Industrial Equipment]   [Laser Equipment]   [2013-12-30 10:16:22 ]

For acrylic and metal material china factory cnc laser cutter HS-B1325M

The metal and nonmetal multi-functional laser beds go through 600℃ heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, to ensure 20 years' working life without deformation. It 's suitable for thin mild steel/ stainless steel, galvanized steel (0.5-2.0mm), ...

Foshan Beyond Laser Technology Co.,Ltd    [General Industrial Equipment]   [Laser Equipment]   [2013-12-30 09:45:51 ]

2014 New Style Octagonal Tent With Glass Wall

1、Specification for the polygonal 1)The size of this product can be customized towards your requirements 2)Frame Material: hard pressed extruded aluminum alloy 6061 /T6 3) The maximum allowed wind speed is 80km/h. 2、Polygonal application The polygonal marquee can be widely ...

Guangxi Nanning Safe Tent Co.,Ltd    [Business Services]   [Advertising]   [2013-12-30 08:43:35 ]