Palisade pales, the main components of palisade fencing, can be sold separately for repairing a damaged fence and cladding apalisade gates. Taking full advantages of forbidding appearance, the pales deter would be intruders and protect your house, office or factory, etc.
Typically palisade pales are supplied with three types of vertical pale profile: angle iron, D section and W section style, which are engineered with inherent strength and high resistance to attempts of pry, impact, bending, dismantle installation and dislocation.
D section pales
W section pales
Angle steel pales
D section pales, working with long bolts, are designed for boundary delineation requiring low to medium security and damage resistance.
W section pales, with higher inherent strength and better vandal resistance, are the most used type to provide effective high security and extra protection. Fastened by short bolts, the W type palisade pales are flush against the horizon rails without flexibility.
Angle steel pales, bolted or welded to horizon fence rails, are suitable for general purpose applications, such as residential estates protection.
It also available in a choice of pale heads for W or D section pales and angle iron pales as shown in the pictures:
Normally, the palisade pales with triple and splayed points come with the maximum security. However, those palisade pales with round & notched heads are ideal for areas where the intimidating appearances are not appropriate such as schools.
Details:
Typically specification:
Pale height | D section pale thickness | W section pale thickness | Angle steel pale sizes |
---|---|---|---|
1.2m | 2.5mm | 2mm | 40 × 40 × 5mm |
1.5m | 2.5mm | 2mm | 40 × 40 × 5mm |
1.8m | 2.5mm | 2mm | 40 × 40 × 5mm |
2m | 3mm | 2mm | 40 × 40 × 5mm |
2.1m | 3mm | 2mm | 40 × 40 × 5mm |
2.4m | 3mm or 3.5mm | 2.5mm | 40 × 40 × 5mm |
3m | 3.0mm or3.5mm | 2.5mm | - |
3.6m | 3.5mm or 4.0mm | 3mm | - |
you can try ocean parcel post to get through more products