Zero baking castable is a new type of refractory material that is free of maintenance and baking.the advantages of this material can be summed up as follows.1After the construction for the Zero baking castable is finished,the nozzle can be started immediately to ignite for increasing to the operating temperature.During increasing temperature ang application,the construction object poured by zero baking castable is free of burst,crack,overburning,and chip off-falling,and can be used directly without maintenance and oven after construction .Capable of saving the oven cost ,oven time and avoiding maintenance and oven after construction.2.The comparison of our zero baking castable with the low cement castable of the same aggregate and base material is shown as follows.As a type of coagulant,cement shall be added based on the addition ratio of 0.5~3%.The zero baking castable’s temperature at normal temperature and construction performance are higher than that of low cement castable.Because of the addition of less cement and the sharp decrease of low melting material introduced to the castable system,the zero bakingcastable’s performance at high temperature and operating temperature are superior to that of low cement castable.
Physicochemical index for Zero baking castable
item | LHJ | |
Al2O3(%) :≥ | 55~92 | |
Volume density (g/cm3) :≥ | 2.3~3.2 | |
Rupture strength (MPa) :≥ | 110℃×24h | 5~20 |
1350℃×3h | 8~30 | |
Compression strength (MPa):≥ | 110℃×24h | 35~120 |
1350℃×3h | 50~120 | |
Linear change rate (%) | 1350℃×3h | ±0.5 |
Maximum service temperature (℃) | 1350~1500 |
Packing : 25kg/bag; 50kg/bag
Storage instruction :protection against damp
Quality guatantee period :6 months
web:en.jznem.cn
email:jznem-sunny@hotmail.com
skype:hellosunny500@gmail.com
As one of the reliable refractory metal suppliers, Huasheng Metal are keeping a large and comprehensive inventory of the highest quality in form of types of refractory metals such as Powder, Bar, Rod, Sheet, Ingot, Wire and Block, etc., to ensure our customers with fast ...
Brown fused alumina is made of high-quality bauxite, anthracite, and iron filings. It is cooled and smelted at a high temperature by more than 2000 degrees in an electric arc. It is crushed and shaped by a jaw crusher and a ball mill. Description of Brown Fused Alumina for ...
We developed the discharge furnace robotic arm, based on the working process and tools of manual operation of slag port opening and closing of the copper smelting furnace. It has the function of a 7-axis linkage. Taking the horizontal centerline of the furnace as the reference, ...