Main Features
appearance and an arc-shape body, which are handled with matte strips process. With planar non-reactive handles, the operation becomes easier and safer.
1、With a rectangular and complex-layer glass window for viewing, specimens can be inspected during the testing process.
2、The anti-sweat heater unit for the window can prevent water vapor from condensing into water droplets.
3、High-brightness PL fluorescent lamp can provide lighting for the inside chamber.
4、Testing holes can be connected by testing power line and signal line, which can adjust specimen tray by up and down.
5、The airtight and double-isolated door can effectively isolate the internal temperature from leakage.
6、The circulatory system of the compressor, which adopts the French brand Tecumseh, can effectively wipe off the lubricant in the condenser tubes and capillaries, besides, all series of which adopt the environmental friendly refrigerant.
7、Imported LCD screens are set in the controller, on which testing values, setting values and times can be displayed.
8、The controller has multi-stage editing program, by which the temperature and humidity can be controlled by QUICK or SLOP.
9、Built-in removable pulley facilitates the movement and fixation of the machine, which can also be fixed by strong set screw.
Model
A:Internal Dimension W×H×D (40×50×40 ) ,External Dimension W×H×D(110×136×71 cm)
B :Internal Dimension W×H×D (50×60×50 ) ,External Dimension W×H×D(117×146×85 cm)
C :Internal Dimension W×H×D (60×75×60) ,External Dimension W×H×D(130×166×91 cm)
D:Internal Dimension W×H×D (60×85×80 ) ,External Dimension W×H×D(140×176×101 cm)
E:Internal Dimension W×H×D (100×100×80 ) ,External Dimension W×H×D(170×186×111 cm)
F :Internal Dimension W×H×D (100×100×100) ,External Dimension W×H×D(180×196×123 cm)
Specification
Temp. Range: | 0、-20、-40、-60、-70℃—+150℃ |
Accuracy and Uniformity of Temp. and Humidity: | 0.1℃、±1℃ |
Temp. Display Accuracy: | ±0.1℃ |
Heating / Cooling Time: | Heating: about 3℃/minute Cooling: about 1℃/minute |
Interior and Exterior Materials: | The whole machine is made by SUS#304 stainless steel matte processing |
Insulation Material: | Thermostability high-density amino acid ethyl ester foam insulation materials |
Cooling System: | Air cooled |
Protection Device: | Circuit breaker, Compressor over-loaded protection , refrigerant high and low pressure switch, ultra-humidity and ultra-temperature protection switch, fuse, failure warning system |
Accessories: | Recorder(Optional), view window, 50mm test hole, PL light box, clapboard |
Power: | 1Φ220VAC±10%50/60Hz & 3Φ,380V/415VAC±10%50/60Hz |
Purpose This tester is designed as improved model for environment testing, installation high and low temperature testing chamber, can test tensile, pressure, tearing, shearing, peeling strength, deconvolution strength, ring initial adhesion strength and other physical ...
Usage:Universal Testing Machine Model Number:CDW/S 4010A Place of Origin:china High-low Temperature Constant Temperature-Humidity Tester is an universal unit of fundamental environment test. ...